User manual OREGON SCIENTIFIC BAA928U

[. . . ] TOP WEATHER STATION MODEL: BAA928U USER'S MANUAL INTRODUCTION Congratulations on your purchase of the BAA928U Top Weather Station. The BAA928U is all all-in-one weather device and clock. The BAA928U, a weather forecasting device, and has several weather related functions. One function is that it takes and records temperatures. [. . . ] The E, I, D, F or S language indicator will flash. Use the UP/DOWN button to select E for English, I for Italian, D for German, F for French, or S for Spanish (see language chart illustration). Press MODE and the day-of-the-week will flash. Use the UP/DOWN button to enter the day. Press MODE again to confirm and exit. HOW TO USE THE BACK-LIGHT Press SNOOZE/LIGHT bar once. The back-light will be turned on for five seconds. TIME DISPLAY MODES The current time and date can be displayed in three modes: hour, minute, second; hour, minute, day-of-the-week; or day, month, year. Press MODE button to change from one mode to the other. hour, minute, day-of-the-week day, month, year 3 GB GB MULTILINGUAL DAY-OF-THE-WEEK FUNCTION The day-of-the-week can be expressed as an abbreviation in five different languages. The languages and their selected abbreviations for each day of the week are shown in the language chart below. To select a particular language follow the instructions in the " HOW TO SET THE CALENDAR " section. German HOW TO SET AND ACTIVATE THE ALARM Press ALARM button to display the alarm time. Press ALARM and hold for three seconds to make changes to the alarm time. Press ALARM and enter the value for the minute digits. The alarm is automatically activated. ABOUT ALTITUDE SETTING Changes to the altitude compensation reading can be made when the altitude section of atmospheric pressure window is flashing. Use the UP/DOWN button to enter the desired value. For users who are at elevations other than sea level, such as mountainous areas, sea level barometric pressure do not apply. The atmospheric pressure setting will need to be set to the corresponding elevation. Barometric pressure settings can be set to accommodate elevations between -100 to 2500. As previously mentioned, to make changes to the altitude setting: 1. Press MODE button until the calendar settings are displayed (day, month, year). Press MODE and hold for three seconds, when the altitude section flashes, use the UP/DOWN button to enter the appropriate setting. To deactivate the alarm, press ALARM to show the alarm time, then press ALARM again to deactivate it. Note: A small icon ( ) in the upper right corner of the time/date section of the LCD indicates that the alarm is set. The alarm is deactivated if the icon is not shown. ALARM AND SNOOZE FUNCTION When the alarm function is active, the unit will alarm at the set time. The display will light up for five seconds with the ALARM ON icon flashing. [. . . ] The corresponding moon phase will appear immediately on the screen. The unit will return to the last display mode when the UP/DOWN button is left idle for 15 seconds. 1. If the unit comes in contact with a water, dry it immediately with a soft lint-free cloth. Do not clean the unit with abrasive or corrosive materials. [. . . ]