User manual OREGON SCIENTIFIC BAR122HGLA

[. . . ] Other features include a day-of-the-week display in four abbreviated languages, a four-step crescendo alarm, and interchangeable clock display modes. M O D E / S ET ME M CH ANNEL °C AL R ESE T °F O N /O F F 1 GB GB A . FRONT DISPLAY A four line easy-to-read LCD each with specific purposes that relate to weather forecasting, temperature, or clock / calendar / alarm functions. WEATHER FORECAST WINDOW - Graphically illustrates a weather forecast A2. REMOTE TEMPERATURE WINDOW - Displays current temperature, remote sensor unit - Indicates the minimum / maximum remote temperature - Displays remote temperature as Fahrenheit (°F) or Celsius (°C) - Indicates when the remote sensor battery is low - Indicates the remote sensor channel A3. [. . . ] Replace the battery compartment door. Note: For both the remote sensor and the main unit, replace batteries when they are low. The low battery indicator [ ] in the indoor or / and outdoor temperature window will be displayed when the batteries are low. HOW TO READ THE KINETIC WAVE DISPLAY The kinetic wave display shows the signal receiving status of the main unit. There are three possible forms: The unit is in searching mode. No signal received in search mode. 4 MAXIMUM AND MINIMUM TEMPERATURES The maximum and minimum recorded temperatures will be automatically stored in memory. Press MEM again to alternate between the maximum, minimum, and current temperatures. The respective MAX or MIN indicator will be displayed. To clear the memory, press MEM button and hold for three seconds. The maximum and minimum-recorded temperatures will be erased. Subsequently, if you press MEM after the memory has been erased, the maximum and minimum temperature will have the same values as the current reading. TRANSMISSION COLLISION Signals from other household devices, such as door bells, home security systems and entry controls, may interfere with those of this product and cause temporarily reception failure. This is normal and does not affect the general performance of the product. The transmission and reception of temperature readings will resume once the interference recedes. NOTE ON °C AND °F The unit of temperature display is selected on the °C/°F slide switch. The strength of the reception will remain until the next scanning cycle backs place. For better reception, place the clock away from metal objects and electrical appliances to minimize interference. MODE 2. Hour-Minute-Day of the Week (of local time) Day-Month (of local time) MODE 3. Hour-Minute-Day of the Week (of local time) Hour-Minute 6 - Strong HOW TO SET THE CLOCK MANUALLY To set the clock manually, hold MODE/SET for three seconds. The hour digits will blink. - Weak Press or select the hour. Keep pressing the button to in- crease or decrease the value rapidly. The minute digits will blink. - No signal Repeat the same procedure to set the minutes, current date, month, display language, day-of-week and offset for the alternate time zone. Note: The time and date are displayed in 12-HOUR clock format. For the language display, you can choose among English (E), German (D), French (F) and Italian (I). Day-of-week is in the usual sequence of Monday through Sunday. For the alternate time zone, which is indicated by the ZONE icon, enter the hour offset using the and buttons and the BAR113 will calculate the second time accordingly. [. . . ] and . 5. Enter the minutes using ] to exit. The [ ] icon for the alarm chosen will 6. Press [ be displayed indicating the alarm set above is now armed. You can also arm or disarm an alarm by pressing the [AL ON/OFF] button. When an alarm is armed, it will go off at the set time. [. . . ]