User manual OREGON SCIENTIFIC BAR386A

[. . . ] Day and month display REMOTE SENSOR (THN132N) To enable and force a signal search: Press and hold for 2 seconds. Secure the sensor in the desired location using the wall mount or table stand. To disable the signal reception: Press and hold for 2 seconds. SET CLOCK If the clock signal reception is enabled and a signal is being received the clock does not need to be manually set. [. . . ] ALARM: View alarm status; set alarm BACK VIEW WEATHER FORECAST This product forecasts the next 12 to 24 hours of weather within a 30-50 km (19-31 mile) radius based on barometric pressure trend readings. ICON DESCRIPTION Clear Partially Cloudy Cloudy Rainy 1. LED indicator GETTING STARTED 1. CHANNEL switch BATTERIES Insert batteries before first use, matching the polarity (+ and -). Press RESET after each battery change. NOTE The maximum operating altitude for weather forecast is 2500m (8202 ft). TEMPERATURE To toggle temperature unit: Press °C / °F. To view outdoor sensors temperature readings: Press CHANNEL. To auto-scan between sensors: Press and hold CHANNEL for 2 seconds. Each sensor's data is displayed for 3 seconds. To toggle between current, minimum and maximum records for the selected sensor: Press MEM repeatedly. To clear the records: Press and hold MEM for 2 seconds. To search for a sensor: Simultaneously, press and hold MEM and CHANNEL for 2 seconds. NOTE If the sensor is still not found, check the batteries, obstructions, and remote unit location. 1: 2: 3. 8. / : Increase / decrease setting; activate / deactivate clock reception signal MODE: Change settings / display CHANNEL: Switch remote sensor display MEM: View current, maximum and minimum temperature / humidity °C / °F: Select temperature unit TEMP HI / LO : Change settings or enable / disable hi or lo temperature alarm for channel 1 RESET: Reset unit to default settings Battery compartment indicates main unit batteries are low. We recommend that you use alkaline batteries with this product for longer usage and lithium batteries in temperatures below freezing. CLOCK CLOCK RECEPTION This product is designed to synchronize its date and time automatically once it is within range of the WWVB-60 signal from the atomic clock in Fort Collins, Colorado. The clock collects the radio signals whenever it is within 3219 km (2000 miles) of a signal. REMOTE SENSOR The sensor collects temperature readings approx. every 40 seconds and sends them to the main unit. The main unit can collect data from up to 3 sensors. BAR386A_M_R6 1 2006. 4. 7, 4:37 PM TEMPERATURE AND PRESSURE TREND The temperature and pressure trend icons are based on recent sensor readings. RISING STEADY FALLING SPECIFICATIONS TYPE MAIN UNIT LxWxH Weight Temperature unit Temperature range Resolution Clock frequency Synchronization Signal frequency Clock Humidity range Humidity resolution Memory Alarm duration Snooze Clock display Hour format Calendar DESCRIPTION 130 x 55 x 112 mm (5. 1 x 2. 1 x 4. 4 in) 176 g (6. 2 oz) without batteries °C / °F -5°C to 50°C (23°F to 122°F) 0. 1°C (0. 2°F) WWVB-60 Auto or disabled 433 MHz Auto or manual (disabled) 25% - 95% 1% Min / Max relative humidity and temperature 2 minutes 8 minutes HH:MM:SS HH:MM: Day of Week 12 / 24 hour format MM / DD or DD / MM language selectable: E, F, D, I and S 3 x UM-3 (AA) 1. 5 V batteries determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · · · Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio / TV technician for help. DECLARATION OF CONFORMITY The following information is not to be used as contact for support or sales. Please call our customer service number (listed on our website at www. oregonscientific. com), or on the warranty card for this product) for all inquiries instead. [. . . ] · Do not tamper with the unit's internal components. Doing so will invalidate the warranty on the unit and may cause unnecessary damage. The unit contains no user-serviceable parts. · Only use fresh batteries as specified in the user's instructions. [. . . ]