User manual OREGON SCIENTIFIC BAR629HG-EASY WEATHER SYSTEM PRO

[. . . ] INTRODUCTION Thank you for selecting the Oregon ScientificTM Weather System Pro (BAR629HG / BAR629HGU). This device bundles precise time keeping, weather forecast, barometric trend with altitude adjustment, and indoor and outdoor temperature and humidity monitoring features into a single tool you can use from the convenience of your home. In this box, you will find: · · · · Main unit Remote sensor (THGR122NX) Main unit batteries, 3 x UM-3 (AA) 1. 5V Remote sensor batteries, 2 x UM-4 (AAA) 1. 5V Weather System Pro Model: BAR629HG / BAR629HGU User Manual CONTENTS Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 7. 1 7 8 2 3 4 9 10 11 12 13 14 15 5 6 BACK VIEW 1. Table stand 1 2 3 2 LCD DISPLAY REMOTE SENSOR (THGR122NX) 1 2 1 2 16 3 4 5 6 7 8 9 17 18 19 10 20 11 12 13 14 15 21 1. 22. Pressure trend Weather display Outdoor humidity trend Channel number icon Low battery icon for remote sensor Outdoor humidity Indoor humidity trend Indoor icon Low battery icon for main unit Indoor humidity Radio Frequency (RF) reception icon Alarm activated Alarm setting Time Calendar Pressure reading Outdoor temperature trend Outdoor temperature ­ °C / °F Indoor temperature trend Indoor temperature Seconds Moon Phase 1 2 3 4 1. 4. Wall mount hole RESET hole CHANNEL number (1-3) Battery compartment (Battery compartment cover not shown) 3 EN EN GETTING STARTED BATTERIES Batteries are supplied with this product: · Main unit · Remote unit 3 x UM-3 (AA) 1. 5V batteries 2 x UM-4 (AAA) 1. 5V batteries TABLE STAND OR WALL MOUNT Use the stand on the back of the main unit / remote sensor, or mount it on a wall with a nail. To attach the main unit stand: Insert batteries before first use, matching the polarity (+ and -) as shown in the battery compartment. For best results, install batteries in the remote sensor before the main unit. To use the main unit wall mount: NOTE It is recommended that you use alkaline batteries with this product for longer performance. UNIT Main Remote LOCATION Indoor Temperature / Humidity Area Outdoor Temperature / Humidity Area Installing the batteries: To use the remote sensor stand or wall mount: ACCESS FRONT BUTTON PANEL The front button panel is located inside the right portion of the main unit. CHANGE SETTINGS To change, time, calendar and language settings: 1. Press and hold MODE for 2 seconds to enter setting mode. (To reach the setting you want quickly, press and hold or . ) 3. Press MODE to confirm. REMOTE SENSOR (THGR122NX) This product is shipped with a THGR122NX Thermo / Hygro Sensor that collects Temperature and Humidity data. Data can be collected from up to 3 sensors. Additional sensors sold separately. SETUP SENSOR 1. Open the remote sensor battery compartment with a small Phillips screwdriver. Insert the batteries, matching the polarity (+ and -) as shown in the battery compartment. 4 SWITCH OPTION Channel Channel 1-3. If you are using more than one sensor, select a different channel for each sensor. SEARCH FOR SENSOR To search for a sensor, press and hold MEMORY and CHANNEL (on the main unit) for 2 seconds. NOTE If the sensor is still not found, check the batteries, obstructions, and remote unit location. NOTE Signals from household devices such as doorbells, electronic garage doors, and home security systems may cause temporary reception failure. This is normal and does not affect general product performance. The reception will resume once the interference ends. 3. The switch is located in the battery compartment. [. . . ] SUNNY PARTLY CLOUDY CLOUDY RAINY SET ALARM 1. Press to confirm. ACTIVATE ALARM Press to activate or deactivate the alarm. shows in the Clock / Alarm Area when the alarm is activated. TEMPERATURE AND HUMIDITY SILENCE ALARM When the alarm time is reached, the crescendo alarm will sound for 2 minutes. To silence the alarm: · Press SNOOZE / LIGHT to silence it for 8 minutes. [. . . ]