User manual OREGON SCIENTIFIC BAR688HGA

[. . . ] Disposable Lithium batteries have a much lower threshold for temperature with an estimated freezing range of below -30°C (-22°F). Wireless ranges can be impacted by a variety of factors such as extremely cold temperatures. Extreme cold may temporarily reduce the effective range between the sensor and the base station. If the unit's performance fails due to low temperature, the unit will resume proper functioning as the temperature rises to within the normal temperature range (i. e. [. . . ] SET CLOCK To manually set the clock make sure the clock signal reception is disabled. Select the US time zone (Pacific (P), Eastern (E), Central (C) and Mountain (M)), hour, minute, year, month, day and language. NOTE The language options are English (E), German (D), French (F), Italian (I), and Spanish (S). Press MODE to choose between the clock with seconds and clock with weekday display modes. 1. TEMP / HUMIDITY HI / LO : Change settings or enable / disable hi or lo temperature / humidity alarm for channel 1 2. / : Increase / decrease setting; activate / deactivate clock reception signal For best results: · Place the sensor out of direct sunlight and moisture. · Do not place the sensor more than 30 m (100 ft) from the main (indoor) unit. · Position the sensor so that it faces the main (indoor) unit, minimizing obstructions such as doors, walls, and furniture. · Place the sensor in a location with a clear view to the sky, away from metallic or electronic objects. · Position the sensor close to the main unit during cold winter months as below-freezing temperatures may affect battery performance and signal transmission. BAR688HGA_M 1 2005. 12. 2, 2:53 PM ALARM To set the alarm: 1. Press ALARM again to turn alarm ON / OFF. To silence the alarm: · Press SNOOZE to silence it for 8 minutes OR · Press any key except SNOOZE to turn the alarm off and activate it again after 24 hours. To set alarm ON / OFF: 1. Press and hold TEMP / HUMIDITY HI / LO . Use and to select high / low temperature / humidity alarm. Press TEMP / HUMIDITY HI / LO to confirm. Press / to set alarm ON / OFF and press TEMP / HUMIDITY HI / LO to confirm. If alarm has been activated, use and to select the temperature / humidity. Press TEMP / HUMIDITY HI / LO to confirm. To silence the hi / lo alarm: Press any key. The alarm resets automatically and will resound if the hi / lo temperature selected is recorded again. · Do not tamper with the unit's internal components. Doing so will invalidate the warranty on the unit and may cause unnecessary damage. The unit contains no user-serviceable parts. [. . . ] For international inquiries, please visit: www2. oregonscientific. com/about/international. asp RESET Press RESET to return the unit to the default settings. PRECAUTIONS This product is engineered to give you years of satisfactory service if you handle it carefully. Here are a few precautions: · Do not subject the unit to excessive force, shock, dust, temperature or humidity, which may result in malfunction, shorter electronic life span, damaged battery and distorted parts. · Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth. [. . . ]