User manual OREGON SCIENTIFIC BAR913HGA

[. . . ] DIGITAL WEATHER FORECASTER WITH IN-OUT THERMOHYGROMETER AND RF CLOCK MODEL : BAR913HGA USER'S MANUAL INTRODUCTION Congratulations on your purchase of the BAR913HGA Digital Weather Forecaster with In-Out Thermo-Hygrometer and RF Clock. The BAR913HGA is an all-in-one weather forecasting device and clock. The BAR913HGA is a weather forecasting device, which has several weather related functions. Main feature is that it takes and records temperatures and humidities in more than one location. [. . . ] Press [MODE] again, the calendar settings are displayed and the year digits will flash. Use the [UP(+)] or [DOWN(-)] button to change the year. Press [MODE] button and the month digits will flash. Enter the appropriate month using the [UP(+)] or [DOWN(-)] button. Press [MODE] button and the day settings will flash. Enter the appropriate day using the [UP(+)] or [DOWN(-)] button. Press [MODE] again and the language setting for the day of the week will flash. Use the [UP(+)] or [DOWN(-)] button to select E for English, F for French or S for Spanish. Press [MODE] to complete and exit the setting. The weekday can be expressed as an abbreviation in three different languages. The languages and their selected abbreviations for each day of the week are shown in the language chart below. To toggle among the 4 us time-zones, press the zone button. HOW TO SET AND ACTIVATE THE ALARM To set the Alarm Press [ALARM button to display the daily alarm time (the icon " ALARM] ALARM " will be displayed) Press [ALARM and hold for three seconds, the value for the hour ALARM] ALARM setting will flash. Press [UP(+)] or [DOWN(-)] buttons to make changes to the alarm hour setting. Press [ALARM again and the minute digits will flash. Enter the ALARM] ALARM value for the minute setting by using [UP(+)] or [DOWN(-)] buttons. ALARM] ALARM The alarm is automatically activated. The ALARM ON icon [ ] is visible and the alarm will be activated at the specified time. To deactivate the daily alarm function, press the [ALARM] button when the alarm time is displayed. To activate, press the [ALARM] button again. 6 ALARM AND SNOOZE FUNCTION When the daily alarm goes off, the backlight will be on for five seconds and the ALARM ON icon will flash. The alarm is a crescendo alarm with 3 stage increase in intensity. Without interruption, the unit will sound for two minutes. To stop the alarm, press the [ALARM] button. However, if the [ ] bar is pressed, the SNOOZE function will be triggered. [. . . ] Read this instruction manual thoroughly before operating the unit. 10 SPECIFICATIONS Temperature Measurement Main unit Indoor Temperature measurement Proposed operating range Temperature resolution Relative Humidity measurement Measuring Range : 25% RH to 95% RH at 25°C (77°F) : 1% RH : -5. 0°C to +50. 0°C (23. 0°F to 122. 0°F) : 0. 1°C (0. 2°F) Relative Humidity measurement Measuring Range Resolution of Humidity Barometric Pressure measurement Pressure measuring range : 795 to 1050mb / hPa (23. 48 to 31. 01 inHg) : 25 to 95%RH at 25°C (77°F) : 1% RH - Power Main unit : use four (4) UM-3 or "AA" 1. 5V batteries : use two (2) UM-3 or "AA" 1. 5V batteries Resolution Remote unit Temperature measurement Proposed operating range Temperature resolution RF Transmission Frequency No. of Remote unit RF Transmission Range Temperature sensing cycle Remote sensing unit - Weight Main unit : -20. 0°C to +60. 0°C (-4. 0°F to 140. 0°F) : 0. 1°C (0. 2°F) : 433 MHz : Up to 3 units : 100 feet (30 meters) : around 40 seconds Remote sensing unit - Dimension Main unit Remote sensing unit : 6. 44" x 3. 48" x 1. 12" (LxWxD) : 4. 2" x 2. 8" x 0. 84" (L x Wx D) : 6. 6 ounces (without battery) : 2. 6 ounces (without battery) 11 GB GB NOTE ON COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operations. [. . . ]