User manual OREGON SCIENTIFIC BAR926HG-WIRELESS WEATHER STATION WITH WORLD TIME CLOCK

[. . . ] Wireless Weather Station with World Time Clock Model: BAR926HG / BAR966HG USER MANUAL World Time Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Set Daily Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Set Pre-Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The main unit can collect data from up to 6 sensors (5 Thermo / Hygro Sensors and 1 UV Sensor). The main unit is compatible with the following sensors: THGR228N, THGR328N, THR228N, THR328N and THWR288. (Additional sensors are sold separately. Contact your local retailer for more information. ) CHANGE SETTINGS 1. 10 The RTGR328N Sensor collects temperature and humidity readings, and signals from official time-keeping organizations for the radio-controlled clock. S To fold out the stand: 1 SET UP THERMO / HYGRO SENSOR (RTGR328N) 1. Open the battery compartment with a small Phillips screwdriver. Set the channel and radio signal format. The switches are located in the battery compartment. SWITCH Channel OPTION If you are using more than one sensor, select a different channel for each sensor EU (DCF) / UK (MSF) For best results: 2 · Insert the batteries and select the unit, channel, and radio signal format before you mount the sensor. · Place the sensor out of direct sunlight and moisture. · Do not place the sensor more than 70 metres (230 feet) from the main (indoor) unit. · Position the sensor so that it faces the main (indoor) unit, minimizing obstructions such as doors, walls, and furniture. · Place the sensor in a location with a clear view to the sky, away from metallic or electronic objects. Radio Signal Format 4. SWITCH Temp OPTION °C / °F · Position the sensor close to the main unit during cold winter months as below-freezing temperatures may affect battery performance and signal transmission. NOTE The transmission range may vary and is subject to the receiving range of the main unit. You may need to experiment with various locations to get the best results. Close the battery compartment. EN EN SENSOR DATA TRANSMISSION Data is sent from the sensor(s) every 60 seconds. The reception icon shown in the Temperature / Humidity Area indicates the status. ICON DESCRIPTION Main unit is searching for sensors. (The number shows which sensor is selected. ) --- shows in Temp / Humidity Area The selected sensor cannot be found. Search for the sensor or check batteries. Then, press and hold MEM and CH for 2 seconds. [. . . ] NOTE If the temperature is below 26°C / 80°F, or the desired channel is not working, the Heat Index will display "NA". BACKLIGHT Press SNOOZE / LIGHT to illuminate the backlight for 8 seconds. NOTE This information is shown in the Humidity Area when the current measurement is displayed. HEAT INDEX The Heat Index advises 4 levels of warning if the temperature is high. DANGER CATEGORY TEMPERATURE °C 40. 5-54. 4 32. 2-40. 5 26. 6-32. 2 °F >130 105-130 90-105 80-90 25 RESET SYSTEM The RESET button is located in the main unit battery compartment. Press RESET when you change the batteries and whenever performance is not behaving as expected (for example, unable to establish radio frequency link with remote unit or radio-controlled clock). NOTE When you press RESET, all settings will return to default value, and you will lose all stored information. Extreme Danger >54. 5 Danger Extreme Caution Caution EN EN SAFETY AND CARE Clean the product with a slightly damp cloth and alcohol free, mild detergent. [. . . ]