User manual OREGON SCIENTIFIC BAR938HG

[. . . ] It also shows the trend of changes plus the recorded maximum and minimum temperatures. A remote thermo sensor is included with the unit. Apart from temperature, the BAR938HG shows the indoor relative humidity and rates the comfort level. It also retains the maximum and minimum relative humidity readings. [. . . ] The strength of the reception for the last full hour will be indicated. For better reception, place the clock away from metal objects and electrical appliances to minimize interference. Should you wish to deactivate the RF controlled function, press MODE and DOWN( ) button simultaneously. To reactivate the RF control function, press MODE and UP( simultaneously. ) HOW TO SET THE CALENDAR MANUALLY · When the calendar is displayed, press MODE for three seconds. The altitude compensation reading on the atmospheric pressure window will flash. Use the UP or DOWN button to enter the desired value. (See ABOUT ALTITUDE SETTING for more information. ) · Press MODE. Enter the year using the UP or DOWN button. · Press MODE. Use the UP or DOWN button to select D for day-month display or M for month-day display. · Press MODE and follow the same procedure to set the month and day-of-the-month. · Press MODE. The E, I, D, F or S language indicator will flash. Use the UP or DOWN button to select E for English, I for Italian, D for German, F for French or S for Spanish. · Press MODE. Use the UP or DOWN button to enter the day and press MODE again to confirm and exit. The alarm will stop and the bell icon blinks for about eight minutes before going off again. TEMPERATURE TREND The temperature trend indicator shows the trend of temperature changes for the last minutes. Three trends, rising, steady and falling, will be shown. Arrow indicator Temperature Trend Rising Steady Falling HOW TO CHECK INDOOR AND OUTDOOR-REMOTE TEMPERATURES To measure indoor temperatures, press the THERMO button until the IN indicator lights up. To measure outdoor-remote temperatures, press the THERMO button until the OUT indicator is displayed. The temperature can be shown in Centigrade (°C) or Fahrenheit (°F). It is selected on the °C/°F slide switch. Slide the switch to °C for Centigrade or °F for Fahrenheit. The BAR938HG is capable of measuring temperatures within the -50°C (-58°F) and +70°C (+158°F) range. If the temperature goes above or below that, the display will show flashing "70" or "-50". WEATHER FORECAST The unit is capable of detecting atmospheric pressure changes, and basing on the data collected, can predict the weather for the forthcoming 12 to 24 hours. The effective range covers an area of 30 to 50 km. Indicator displays on the unit Forecast Sunny Slightly Cloudy Cloudy Rainy 4 NOTE: 1. The accuracy of a general pressure-based weather forecast is about 70 to 75%, and therefore, cannot be held responsible for any inconveniences so caused by an inaccurate one. The weather forecast is meant for the next 12 to 24 hours. [. . . ] Use the UP or DOWN button to locate the date you want to check. The calendar will be day-driven in this mode. You can go back in time or travel to the future, any day between the hundred years from 1990 to 2089. The corresponding moon phase will appear immediately on the screen. [. . . ]