User manual OREGON SCIENTIFIC BHR616

[. . . ] b. Antenna -Transmits signal to main unit Cross - To level the rain collector 3. Position the main unit and rain collector within effective range of each other (up to 100 feet). 4. Place the rain collector on a level surface. Add a few drops of water; if the water collects at the center of the cross, the collector is level. BATTERY INSTALLATION: MAIN UNIT The main unit uses 2 UM-3 or AA alkaline batteries. [. . . ] To display the calendar, press the MODE/SET button twice. To display the clock again, press the MODE/SET button twice. INTERRUPTED SIGNALS The success of wireless data transmission may vary and is directly related to the positioning of the remote rain collector and the environmental factors of that location. Should there be difficulty in data transmission or should the main unit display go blank, press [ SEARCH] to initiate a search signal between the main unit and the Rain Collector unit. If main unit remains blank verify that: The remote rain collector is still in place. The batteries of both the main unit and rain collector are good. The transmission is within range and path is clear of obstacles and interference. Shorten the distance if necessary. Then press [SEARCH] again. THE RESET BUTTON To reset the main unit, press the Reset button using a blunt stylus to hold down the button. All main unit settings will return to their original default values. TOTAL RAINFALL The total rainfall is displayed on the top window of the LCD display. Upon initial activation, the rainfall amount will be displayed in millimeters. Use the [IN/MM] switch to select between inches and millimeters. To display the start date of the record, press [SINCE] once. The date will appear on top of the LCD screen. To clear the record, hold [SINCE] for two seconds and the current date will be set as the start date. Note that this will also clear the total and current rainfall. TABLE STANDING OR WALL MOUNTING Table-Standing : Your unit comes with stand connector for connecting it to other modular units. RAINFALL HISTORY The rainfall history is displayed on the bottom window of the LCD display. Zero (0) indicates the record for the current day. Records for previous days are shown with a minus (-) sign; for example : (-1) is the record for the previous day and (-2) would be the record for two days preceding the current day. Press the [History] button to scan the records of each day. A total of 9 day's rainfall history can be recorded and displayed. To clear the current day rainfall, hold [SINCE] for two seconds. Note that this will also clear the total rainfall record and start date of the record. STAND CONNECTOR 3 GB GB Wall-mounting: 4. Do not tamper with the unit's internal components. [. . . ] Consult the dealer of an experienced radio/TV technician for help. Address:19861 SW 95th Place, Tualatain, Oregon 97062, USA Telephone Number:1-800-853-8883 Name and model number of the product: Wireless Rain Gauge BHR616 for assistance and a return material authorization. No returns may be made without a return authorization. Please retail your retail receipt as you may be asked to provide a copy of it for proff of date purchased. [. . . ]