User manual OREGON SCIENTIFIC DS6688 ENGMANAUL

[. . . ] EN FR DE IT ES POR Model: DS6688 NL SWE © 2004 Oregon Scientific. 086-003403-012 DS6688 Manual-Eng, Fre, Ger (086-003403-012) SWE User Manual Mode d'emploi Bedienungsanleitung NL POR ES IT DE FR EN EN FR USER MANUAL CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Important Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Statement of Responsibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Notes on Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The period of time before shut-down can be adjusted (1 min. , 3 min. , or 5 min. ) The default auto off time setting is 3 min. NOTE: Auto Off is not available in slideshow mode or when the camera is connected to a PC. TV OUT If connecting the camera to a TV, you can set the camera's TV output system to either the PAL or NTSC standards. The default TV Out setting is set to PAL. FILE NUMBER This option will format all data in either the internal memory or the external SD card / MMC, including all protected files. CAUTION: Do not eject the SD card / MMC while the card is being formatted, as this may damage the card. Formatting deletes all data from the memory device chosen. RESET You can reset all camera settings to factory default. Refer to the Setup Menu table to see the defaults for each setting. NOTE: The reset function can reset all the settings to factory default except for the current time and date. LCD BRIGHT (LCD BRIGHTNESS) You can adjust the LCD brightness level to compensate for different lighting conditions, for example. · If there is plenty of ambient light such as in bright sunshine, you can adjust the brightness levels higher to make the display easier to see. · If ambient light levels are relatively low such as indoors or at night, you can adjust the brightness levels lower to make the display easier to see. TIP: To maximize battery life, keep brightness settings low. SYSTEM INFORMATION This option allows you to check the camera model number and current version of firmware installed. FR DE IT SWE 13 14 DS6688 Manual-Eng, Fre, Ger (086-003403-012) SWE Your camera keeps an internal file counter for every image and movie taken that can be reset. The setting options are Continue (default setting) and New. NOTE: All files are stored within a designated folder. The initial folder is always numbered at 100. Under the Continue default option, the internal file counter is first set to "0001". Every subsequent picture is assigned an incremental File Number. NOTE: The internal file counter increments by 1 regardless of the media unless it is reset. Under the New option, the internal file counter to "0001" for new media only. [. . . ] You can double-click on the images and movies to view them. These files can also be deleted, copied, or moved like normal computer files. FR DE IT ES ES IT DE FR EN CONNECTING TO EXTERNAL DEVICES TRANSFERRING FILES FROM CAMERA TO PC OR MACINTOSH EN MEMORY CAPACITY, SIZE AND QUALITY Flash does not go off as expected. Flash is set to No Flash Mode Mode Switch is set to Playback or Movie Mode. Flash has not finished charging Enable flash by changing it to another setting Change the Mode Switch to Camera Mode. Wait until the Status Lamp stops blinking Turn on the flash by changing the Flash Mode Move closer to the subject Clean the lens with a soft cloth Set the dial to the correct focus distance Set Mode Switch to Playback Mode. [. . . ]