User manual OREGON SCIENTIFIC DS8228

[. . . ] FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] To turn on the camera after it has been automatically shut down, push MENU or DISP on the camera. Auto Off is not available in slideshow mode or when the camera is connected to a PC. Logo Setting When the camera is turned on, the opening logo will appear briefly by default. You can choose to switch off this opening logo. Camera Auto Off Logo File Number Format 2/3 MENU Exit Setup 3 min. On New Internal OK OK FRANÇAIS This setting lets the user adjust the Current Date and Time of the camera. When accessed, a new Set Clock configuration screen will appear. to adjust the values of each field 1/3 MENU Exit OK OK DEUTSCH A Current Date Field Adjust the current date of the camera. B Date Format Choose from the following date formats: · · · DD/MM/YY (date, month, year) MM/DD/YY (month, date, year) YY/MM/DD (year, month, date) A C Set Clock 29 / 08 / 2002 11 : 55 pm 2/2 MENU Exit DD/MM/YY 12-Hr OK OK 2/3 MENU Exit OK OK B D File Number Setting Your camera keeps an internal file counter for every image and movie taken that can be reset. The setting options are Continue and New. Continue Under this default option, the internal file counter is first set to "0000". Every subsequent picture is assigned an incremental File Number. ITALIANO C Current Time Field Adjust the current time of the camera. D Time Format Choose between 12-hr (AM/PM) or 24-hr display. Language Setting Camera P. Counter Set Clock Language Beep Tone 1/3 MENU Exit Setup Down 11:55pm English Off OK OK 2/3 MENU Exit OK OK ESPAÑOL New Under this option, the internal file counter resets to "0000". The File Number setting then returns to the Continue option after the reset. It is advisable to only set the File Number setting to New in the following cases: · · Either the internal memory or CF card has been newly formatted ( A completely new CF card has been installed. p. 16). Beep Tone Setting PORTUGUÊS 1/3 MENU Exit OK OK 14 15 DS8228 Manual (086-002861-054) PORTUGUÊS The camera will make "beeping" sounds during certain functions, such as the Set Timer function's countdown. This "beeping" sound can be turned on or off. Camera P. Counter Set Clock Language Beep Tone Setup Down 11:55pm English Off ESPAÑOL Choose your menu language: English, French, German, Spanish, Italian, and Portuguese. The default language is English. The internal file counter increments by 1 regardless of the media type, unless it is reset. ITALIANO Camera Auto Off Logo File Number Format Setup 3 min. On New Internal DEUTSCH Camera Auto Off Logo File Number Format Setup 3 min. On New Internal FRANÇAIS Set Clock Setting Camera P. Counter Set Clock Language Beep Tone Setup Down 11:55pm English Off ENGLISH P. Counter Setting (Picture Counter) Auto Off Setting (Auto Power-Off) ENGLISH This option will format all data in either the internal memory or the CF card, including all protected image files. Caution: Do not eject the CF card while the card is being formatted, as this may damage the card. Camera Auto Off Logo File Number Format 2/3 MENU Exit Setup 3 min. [. . . ] Wait until the Flashlight Sensor has turned off ( p. 10). Turn on the flash by changing the Flash Mode ( p. 10). Move closer to the subject or choose another Focus Mode ( p. 9). Clean the lens with a soft cloth ( p. 2). [. . . ]