User manual OREGON SCIENTIFIC ENGLISHGP801

[. . . ] GP801 Speed + Distance System INSTRUCTION MANUAL MODE D'EMPLOI BEDIENUNGSANLEITUNG MANUALE DE ISTRUZIONI INSTRUCCIONES DE FUNCIONAMIENTO MANUAL DE INSTRUEÇÕS GEBRUIKSAANWIJZING INSTRUKCJA UZYTKOWANIA 1 GB GB Oregon Scientific Speed & Distance System MODEL NO. : GP801 USER MANUAL TABLE OF CONTENTS Now You Know--How Far?How It Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sports Watch Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Speed and Distance System Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] NOTE: Seconds cannot be manually changed. Press and hold START/STOP for 6 seconds until Hold for time 2 displays. Follow Steps 3 - 4 above to set Time Zone 2. To View Time of Day and Speed and Distance: With the Transceiver functioning and while standing at least six feet from other users of the GP801, press SPEED/DISTANCE to begin displaying data. The display will show either final lap time or final event time. 18 Recall Mode Chrono Recall allows you to review stored lap information while the Chrono is running or stopped. In Recall mode, press SPLIT/RESET/SET repeatedly to display, in order, Average Speed, Average Pace, Distance and Lap and Split times for the first lap. Lap time appears in upper line of display. The lap number display has an R in front of it to indicate recall. (If you have not saved any laps, NO LAPS STORED is shown. ) Continue to press SPLIT/RESET/SET to display information for successive laps until the final lap. Press START/STOP to go back to previous display. If no speed and data information was recorded for a lap, then only the lap time (in upper line of display) and split time are shown. Press MODE at any time to return to the Time mode. To rapidly scroll through multiple laps, press and hold SPLIT/ RESET/SET or START/STOP. 19 GB GB Timer Mode (Countdown Timer) The Timer will count down from a set length of time up to 100 hours. At the end of the countdown, the Timer will optionally a) Stop at End, b) Repeat at End or c) Stop and Start the Chronograph (Chrono must be reset). It will also display selected speed or distance information for the timed interval. Setting the Timer: 1. In Timer mode, press and hold the SPLIT/RESET/SET button. Press START/STOP to increase the setting. Press START/ STOP to increase the setting. Press MODE to view options for the end of the countdown (stop, repeat, start Chrono). Press SPLIT/RESET/SET to save changes and exit. Press SPEED/DISTANCE button to cycle through type of speed and distance information to be displayed in the upper row of the Timer. 20 Timer Operation: 1. Original time or speed and distance will be shown in upper display, while remaining time will be shown in main display. [. . . ] Regularly test and clean the device. 27 GB GB · Do not subject the product to impact, shock, extreme temperatures or humidity, wind-born sand, hot water, or water depths greater than those specified in this manual. · Take special care when handling a damaged LCD display, as the liquid crystals can be harmful to your health. · If the device becomes wet, allow it to completely dry before using. · Do not use or store the device in locations that may adversely affect its performance such as next to heat sources or electrical equipment, in extreme conditions, or in direct sunlight. [. . . ]