User manual OREGON SCIENTIFIC FERRARI FAP101

[. . . ] 11 Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 1 Reset system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Safety and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Do not use rechargeable batteries. EN EN DOWN to change each setting. Press and hold to enter fast-setting mode. Press CLOCK or ALARM to switch between settings. SET RADIO SIGNAL FORMAT The RADIO SIGNAL FORMAT switch is located on the back of the product. Reception takes 2 ­ 10 minutes to complete. Once complete, the icon will stop blinking. Strong signal Weak signal No signal CLOCK This product can automatically synchronize the date and time with official time-keeping organizations in Frankfurt (Germany) and Rugby (England). When the unit is within 1500 km (932 miles) of a RF signal, the reception icon will blink during reception. 8 For best results, place the unit away from metal or electrical objects, and near a window with a clear view to the sky. TO DISABLE OR ENABLE AUTOSYNCHRONIZATION Press DOWN for 2 seconds to disable the autosynchronization. The unit will not respond to radio signals until you reactivate the synchronization. To enable auto-reception, press seconds. UP for 2 SET OR CHANGE THE CLOCK Clock auto-synchronization must be deactivated before you manually set the clock. Press and hold CLOCK for 2 seconds to enter setting mode. Select the 12/24-hour format, hour, minute, year, date/month format, month, date, and display language. Press CLOCK to confirm. 9 EN EN The language options are (E) English, (F) French, (D) German, (I) Italian, and (S) Spanish. VIEW DAY OF WEEK OR SECONDS Press CLOCK. SET ALARM 1. Press and hold ALARM for 2 seconds to enter setting mode. Select the hour, minute, and alarm type ( for Beep Alarm or for Ferrari Engine). SNOOZE Press SNOOZE/LIGHT to temporarily disable the alarm for 8 minutes. The alarm icon will blink while Snooze is activated. 10 ALARM When activated, the Beep Alarm starts quietly, then gradually becomes louder until it crescendos at 1 minute. The LCD display lights up for the first 5 seconds. TO TURN THE ALARM OFF OR ON Press CLOCK, UP, or DOWN. To turn the alarm off completely (deactivate it for the next day), press DOWN when the alarm time is displayed. [. . . ] The contents of this user guide are subject to change without notice. Colors may vary. ADDITIONAL RESOURCES Visit our website (www. oregonscientific. com) to learn more about your new product and other Oregon Scientific products such as digital cameras, handheld organizers, health and fitness gear, and weather stations. The website also includes contact information for our customer service department, in case you need to reach us. · · 14 TROUBLESHOOTING Check here before contacting our customer service department. Problem Temp Problem Clock Symptom Cannot auto-synch Remedy Adjust batteries, press RESET (à 12), and manually activate autosynch (à 9). [. . . ]