User manual OREGON SCIENTIFIC FERRARI FSP301

[. . . ] 13 Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Reset system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If you are using more than one remote unit, be sure to select a different channel number for each unit. INSTALLATION Mount the remote unit on a flat surface using the recess hole on the back of the unit. For best results: · · Before you insert the batteries, select the measurement unit and channel number first. Place the unit out of direct sunlight and moisture. EN EN · · Do not place the remote unit more than 20 ­ 30 meters (60 ­ 90 feet) from the main (indoor) unit. Position the unit so that it faces the main (indoor) unit. Minimize obstructions such as doors, walls, and furniture. CLOCK This product can automatically synchronize the date and time with official time-keeping organizations in Frankfurt (Germany) and Rugby (England). When the unit is within 1500 km (932 miles) of a RF signal, the reception icon will blink during reception. SET RADIO SIGNAL FORMAT The RADIO SIGNAL FORMAT switch is located on the back of the product. Reception takes 2 ­ 10 minutes to complete. Once complete, the icon will stop blinking. 10 You may need to experiment with various locations to get the best reception. Strong signal Weak signal No signal TO DISABLE OR ENABLE AUTOSYNCHRONIZATION Press DOWN for 2 seconds to disable the autosynchronization. The unit will not respond to radio signals until you reactivate the synchronization. To enable auto-reception, press UP for 2 seconds. NOTE For best results, place the unit away from metal or electrical objects, and near a window with a clear view to the sky. SET OR CHANGE THE CLOCK Clock auto-synchronization must be deactivated before you manually set the clock. 11 EN EN 1. Press and hold CLOCK for 2 seconds to enter setting mode. Select the 12/24-hour format, hour, minute, year, date/month format, month, date, and display language. Press CLOCK to confirm. ALARM When activated, the Beep Alarm starts quietly, then gradually becomes louder until it crescendos at 1 minute. The LCD display lights up for the first 5 seconds. SET ALARM NOTE The language options are (E) English, (F) French, (D) German, (I) Italian, and (S) Spanish. 1. 2. Press and hold ALARM for 2 seconds to enter setting mode. for Select the hour, minute, and alarm type ( Beep Alarm or for Ferrari Engine). Press UP or DOWN to change the setting. VIEW DAY OF WEEK OR SECONDS Press CLOCK. 12 3. Press ALARM to confirm. WEATHER FORECAST This product forecasts the next 12 to 24 hours of weather within a 30 to 50 km (19 - 31 mile) radius with 70 to 75 percent accuracy. The weather forecast is always displayed. [. . . ] Do not mix new and old batteries or batteries of different types. Do not use rechargeable batteries with this product. Remove the batteries if storing this product for a long period of time. Do not make any changes or modifications to this product. [. . . ]