User manual OREGON SCIENTIFIC FERRARI FSW301

[. . . ] 14 Temperature & humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Reset system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 1 Safety and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When the unit is within 1500 km (932 miles) of a RF signal, the reception icon will blink during reception. 10 Strong signal Weak signal No signal synchronization. The unit will not respond to radio signals until you reactivate the synchronization. To enable auto-reception, press UP for 2 seconds. NOTE For best results, place the unit away from metal or electrical objects, and near a window with a clear view to the sky. TO DISABLE OR ENABLE AUTOSYNCHRONIZATION Press DOWN for 2 seconds to disable the auto11 SET OR CHANGE THE CLOCK Auto-synchronization must be deactivated before you manually set the clock. Press and hold CLOCK for 2 seconds to enter setting mode. Select the 12/24-hour format, hour, minute, year, date/month format, month, date, and EN EN display language. NOTE The language options are (E) English, (F) French, (D) German, (I) Italian, and (S) Spanish. ALARM When activated, the Beep alarm starts quietly, then gradually becomes louder until it crescendos at 1 minute. The LCD display lights up for the first 5 seconds. SET ALARM 1. VIEW DAY OF WEEK, SECONDS, OR DATE Press CLOCK. 2. Press and hold ALARM for 2 seconds to enter setting mode. Select the hour, minute, and alarm type ( for Beep Alarm or for Ferrari Engine). Press ALARM to confirm. 12 SNOOZE Press SNOOZE/LIGHT to temporarily disable the alarm for 8 minutes. The alarm icon will blink while Snooze is activated. TO TURN THE ALARM OFF OR ON Press CLOCK, UP or DOWN. To turn the alarm off completely (deactivate it for the DOWN when the alarm time is next day), press displayed. Press UP to activate the alarm again. BAROMETER This product tracks barometric pressure changes over the past 24 hours to provide the weather forecast ( 14). Barometric changes are measured by the main (indoor) unit. SET UNIT AND ALTITUDE You can set the unit of measurement (mb/hPa or inHg) and altitude. Setting the altitude allows the product to take more accurate barometric measurements. 13 EN EN 1. 2. The Barometer Unit switch is located on the back of the product. To set the altitude, press and hold ALT for 2 seconds. Press ALT to confirm. Clear Partly Cloudy Cloudy Rainy WEATHER FORECAST This product forecasts the next 12 to 24 hours of weather within a 30 to 50 km (19 - 31 mile) radius with 70 to 75 percent accuracy. [. . . ] Remove the batteries if storing this product for a long period of time. Do not scratch the LCD display. · · · Do not make any changes or modifications to this product. Unauthorized changes may void your right to use the product. The contents of this user guide are subject to change without notice. [. . . ]