User manual OREGON SCIENTIFIC JD BAR122HGLA

[. . . ] The main feature is that it takes and records temperatures and humidities in more than one location. Using a wireless remote thermo-hygro sensor, it can simultaneously monitor temperatures and humidities in three remote locations. The unit will show temperature and humidity trends as well as record maximum and minimum temperature and humidity readings. BAR898HGA is able to receive and display readings from up to 3 remote sensors. As part of the weather forecasting function, the unit has a built-in barometer that displays atmospheric pressure. [. . . ] The unit is designed such that you can conveniently use the backlight feature irrespective of whether the unit is wall-mounted or free standing on the table. 6 Wall-Mount Table-Stand For better reception, place the clock away from metal objects and electrical appliances to minimize interference. Should you wish to deactivate the RF controlled function, press and hold the [ZONE] button. To reactivate the RF control function, press and hold the UP [ ] button. Chart Indicating Radio Signal Strength Press the corresponding [ SNOOZE / LIGHT ] button or the button on the stand. The backlight will be activated for 5 seconds. Good No signal Receiving ABOUT RADIO RECEPTION The BAR898HGA is designed to automatically synchronize its calendar clock once it is brought within range of the U. S. When the BAR898HGA is within range, its radio-control mechanism will override all manual settings unless the auto-reception function is manually disabled. When the unit is receiving radio signal, the RADIO RECEPTION signal will start to blink. A complete reception generally takes about 2 to 10 minutes, depending on the strength of the radio signal. When the reception is complete, the RADIO RECEPTION signal will stop blinking. The strength of the reception for the last full hour will be indicated. 7 HOW TO MANUALLY SET THE CLOCK Press [MODE] and hold for three seconds. The intensity will increase in three stages. Without interruption, the unit will alarm for two minutes. To stop the alarm, press the [ALARM] button. However, if [ SNOOZE / LIGHT ] is pressed, the snooze function will be triggered. The alarm will stop and the ((. )) icon blinks for eight minutes. To deactivate the snooze function, press the [ALARM] button. To toggle among the 4 U. S. time-zones, press the [ZONE] button. HOW TO SET AND ACTIVATE THE ALARM To set the Alarm Press [ALARM] button to display the daily alarm time (the icon " will be displayed) " Press [ALARM] and hold for three seconds, the value for the hour will flash. 8 CHECKING INDOOR AND REMOTE TEMPERATURES & HUMIDITIES To display the indoor and outdoor temperature and humidity readings, press the [CHANNEL] button to toggle among the indoor, Channel 1, 2 and 3 displays. The temperature can be shown in Centigrade (°C) or Fahrenheit (°F). Select the appropriate reading by using the °C/°F slide switch (located in the battery compartment). Slide the switch to °C for Centigrade or °F for Fahrenheit. [. . . ] Do not tamper with the unit's internal components. Doing so will terminate the unit's warranty and may cause damage. The unit contains no user-serviceable parts. Only use new batteries as specified in this instruction manual. [. . . ]