User manual OREGON SCIENTIFIC JM888-RADIO CONTROLLED OUTDOOR WALL CLOCK WITH THERMOMETER

[. . . ] Radio-controlled Outdoor Wall Clock with Thermometer Model: JM888 USER MANUAL INTRODUCTION Thank you for selecting the Oregon ScientificTM JM888 Radio-controlled Outdoor Wall Clock with Thermometer as your product of choice. This product is splash-proof and targeted for outdoor usage, ideal for places such as a golfcourse clubhouse, pool-side terrace, restaurant patio, garden shed, outdoor terrace, veranda or balcony. This device is designed to give you many years of reliable service, including the following conveniences: · Radio-controlled calendar clock* · Local temperature display · Optional UVI display (with UV sensor UVR138 purchased separately) *Automatically synchronizes the current time and date when it is brought within range of the radio signal DCF77 generated from Frankfurt, Germany for Central Europe or MSF60 generated from Rugby, England . NOTE Keep this manual handy as you use your new product. [. . . ] Replace all the batteries at the same time - it is dangerous to mix old and new batteries. NOTE If the battery voltage level is low, the battery" icon will be displayed. PLACEMENT OF UNIT You can either mount the main unit on a wall or make it stand on a flat surface. Table stand - The unit is already equipped with a table stand. Simply pull out the table stand and rest the main unit on a flat surface. Wall mount - The main unit can be mounted onto a wall using a No. Position and nail the screw into the place where you would like to hang your main unit. Leave ample space between the wall and the screw head while testing to make sure the nail is secure. Fit the unit's wall-mount recess hole onto the screw head. "low Time zone Hourly chime indicator Time display Low battery icon for UV sensor UV (Ultraviolet) index level indicator UV Index Local temperature / UV index display - Displays currently monitored temperature / UV index 8. Radio reception signal - Indicates the condition of radio reception 9. Low Battery - Appears when power is low 10. Current date display - Displays current date 1. 7. GETTING STARTED UNPACKING THE PRODUCT When you unpack your clock, make sure to keep all the packing materials in a safe place, in case you need to later transport or return it for servicing. In the box, you will find: · Clock unit · Batteries · User manual BATTERIES 3 JM888_EN_output 3 10/11/2004, 10:59 EN EN NOTE ON WHERE TO PLACE THE UNIT This unit is designed for outdoor usage. When the unit is relocated from one place to another in extreme temperatures (e. g. from a very hot area to a very cold one), water condensation may occur on the lens at the front. This will not affect the functions of the unit. In this case, leave the unit in the same location for 2-3 hours and the water condensation will disappear. The temperature sensor is located at the top of the unit. When the unit is placed under direct sunlight, the accuracy of the temperature display may be affected. TIP It is suggested to put the unit under shade from direct sunlight. [. . . ] Please refer to the UVR138 user manual for more information. UV INDEX DISPLAY CHANGING CELSIUS TO FAHRENHEIT To change Celsius to Fahrenheit: Simply slide the switch at the back of the clock from °C to °F. (This switch is located inside the battery compartment). THE RESET HOLE If the clock behaves strangely or stops responding, insert and press a blunt stylus into the clock's RESET hole to reset the unit's settings. (This is located inside the battery compartment). [. . . ]