User manual OREGON SCIENTIFIC JMR838WFA

[. . . ] Position the remote sensor within the signal transmission range of the main display unit. The maximum transmission range is 100 feet (30 metres). Remove the screws of the battery door on the remote thermosensor unit. Select display of temperature in either °C or °F using the °C/°F slide switch. 4. [. . . ] When the calendar is displayed, press ALARM once. ALARM AND SNOOZE FUNCTION When the alarm function is active, the unit will sound at the set time. With the crescendo function, the alarm initially starts gently and increases in intensity in three stages. Without interruption, the alarm will activate for two minutes. However, if the [ (( SNOOZE )) ] is pressed, the snooze function will be triggered. The alarm will stop for eight minutes before it activates again. To change the alarm-time display to the calendar display: 2. When the alarm time is displayed, press CLOCK once. HOW TO SET THE CALENDAR CLOCK MANUALLY Under certain circumstances, the user may wish to set the JMR838WFA manually. To set the JMR838WFA manually, follow the procedures below: Note: The RF controlled mechanism overrides manual settings. If manual settings are made, the clock will periodically adjust the time to what is indicated by the radio signal. TEMPERATURE DISPLAY The JMR838WFA displays temperature in Fahrenheit (°F). A user-select option lets the user choose between indoor and outdoor display. To manually set the clock: 1. Enter the correct month using the [ rapidly increase the value. Hold to indoor temperature display 3. Press CLOCK to confirm and proceed to set the minutes. Press CLOCK to confirm and proceed to enter the year, current month and day. Next, select a language for the weekday. The time and date are now set. outdoor temperature display Press THERMO to alternate between the temperature displays. The outdoor temperature display has a kinetic-way display. The kinetic-wave display shows the signal-receiving status by the main unit. The are three different signal status icons. TO SET AND ACTIVATE THE ALARM The calendar display and the alarm display share the same section of the display. The unit is in searching mode. Temperature readings are securely registered. No signals. 4 SENSOR TRANSMITION STATUS If blanks "----" appear on the outdoor temperature display of the main, the unit is not receiving a signal from the remote thermo sensor. The user may be able to receive a signal by forcing a signal search. WEATHER FORECAST FUNCTION The JMR838WFA detects barometric pressure changes and displays the illustrated weather symbols that indicate weather forecasts for 12 to 24 hours in the future. The radius of the forecast is approximately 30 - 50 km (18 - 31 miles). To force a remote sensor signal: Press and hold THERMO for two seconds. [. . . ] Connect the equipment into an outlet on a circuit different from that of the receiver which the receiver is needed. Consult the dealer of an experienced radio/TV technician for help. CUSTOMER ASSISTANCE Should you require assistance regarding this product and its operation, please contact our customer care department at 800853-8883 or by email at helpme@oscientific. com. Our customer care department is available 24-7-365. WARRANTY This product is warranted to be free of manufacturing defects for a period of 90-days from date of retail purchase. Defective product should be directed to the place of retail purchase for replacment. [. . . ]