User manual OREGON SCIENTIFIC JMR868

[. . . ] Jumbo RF Wall Clock with Night Sensor Model: JMR868 / NR868 User Manual INTRODUCTION Thank you for selecting the Oregon ScientificTM Jumbo RF Wall Clock with Night Sensor. This device is designed to give you many years of reliable service, including the following conveniences: Radio-Controlled Calendar Clock Temperature Display Nightlight with Motion Sensor Sensor or Manual Activated Backlight Time Zone Offset Function 2-Minute Crescendo Alarm Hourly Chime Function Day of the Week in 1 of 5 Languages Wall Mount and Table Stand Keep this manual handy as you use your new product. It contains practical step-by-step instructions, as well as technical specifications and warnings you should know. Jumbo RF Wall Clock with Night Sensor Model: JMR868 / NR868 User Manual CONTENTS Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] RESET Press to return all values to the default settings. EU / UK switch Slide to select your nearest radio signal base i. e. England or Germany. 2 TABLE STAND The wall clock can be placed on a table using the table stand. BACK VIEW 1 2 KEY FEATURES - NIGHTLIGHT WITH MOTION SENSOR FRONT VIEW 6 3 1 7 8 4 5 2 3 6 4 5 7 1. Rotary Motion Sensor Detects motion and activates the nightlight and clock backlight in accordance with the settings used. Twist the knob to direct the sensor to the position you want. Light Sensor Detects the light intensity of the environment. Light ON Press to turn the clock backlight ON for 10 seconds remotely. Power - ON / OFF Slide to the appropriate setting to turn the battery or AC power ON or OFF. Light Panel When activated the panel will light up. Battery Compartment Uses 3 x UM-3 / AA 1. 5V batteries. Channel 1 / 2 Slide to select either Channel 1 or Channel 2. Mode - On / Off / Auto Slide switch to ON - the nightlight will turn on in a dark room. Slide switch to OFF - the nightlight is turned off. Slide switch to AUTO - the nightlight will only be activated by motion in a dark room. Clock Control - On / Off Slide switch to ON - when motion is detected, the clock backlight will be activated. Slide switch to OFF - the clock backlight will not be activated by the motion sensor. + Light - Rotary knob Rotate to adjust the sensitivity of the light sensor. Reset button Press to reset the nightlight. EN EN SAFETY AND CARE SAFETY PRECAUTIONS Please observe the following safety precautions when setting up and using this product. LCD panel - The LCD panel is made of glass, and may break if the unit is dropped. Heat sources - Keep the product away from heat sources, such as radiators, stoves, heaters, and other heat-generating products. Water and moisture - Do not use the product in or near water or in high moisture areas, such as a bathroom. Power source - The product may be susceptible to power surges. [. . . ] Nightlight Auto - When the nightlight detects motion in a dark room, it will light up for 20 seconds. Press and hold the ALARM button for 2 seconds to enter the Backlight Setting Mode. Press the or buttons to change the setting. (Make sure you select the Code setting that matches the Code switch in the back of the nightlight). [. . . ]