User manual OREGON SCIENTIFIC RM313PA

[. . . ] Once the desired time zone block is highlighted on the map, the time will automatically adjust accordingly. WARNING : Do not press and hold the ZONE button for more than three seconds. Use the single press method to set the time zone. Holding the button will turn off the automatic time signal reception. [. . . ] NOTE: THE Kids Projection Clock will continue to display the selected function (Alarm Time or Date) until the (( · )) button is pressed again. Do not become concerned if your Kids Projection Clock does not receive a signal within the first few minutes. RF appliances or radios are most effective when placed near a window, and you may need to orient the clock or the antenna to receive a stronger signal. Please be patient with the first receptions of the time signal. Once the Kids Projection Clock has received a time signal, updates are accomplished with greater ease. Please refer to the Trouble Shooting section (at the end of this booklet) for more information. Projection on (Figure A. 7) Project on turns to enable or disable th continuous projection when adapter is in used. Note: this switch can only be used with the power adapter installed. mentary projection, use the [ Figure A The technology underlying the radio-controlled Kids Projection Clock was previously dedicated only to commercial and industrial uses, including aircraft and ship navigation, broadcasting stations, and research facilities. Oregon Scientific was the first company to develop a consumer-level timepiece with alarm that can truly be called the world's most accurate clock. DESCRIPTION OF LCD DISPLAY Please refer to Figure A for a detailed description of Kids Projection Clock LCD display and refer to the appropriate section(s) of the these instructions for more specific information. TECHNICAL DATA · · A A U M 3 1. 5V Integrated radio receiver for reception of time signal 10kW transmitter WWVB: at 60kHz Operating temperature: 35-120 ° F Setting time with interference-free reception: 3-7 minutes Automatic signal-reception activation: six times every 24 hours HiGloTM backlighting source: Electroluminescence Battery type: 2 AA (not included) Your last signal reception was excellent and time Synchronization with the US Atomic Clock has Taken place. Your last signal reception was insufficient and it is recommended that you reposition the clock. Indicators On the Display Meaning Signal Strength Indicator (Figure A. 8) · · Figure B RESET A A U M 3 1. 5V · · FEATURES · · · · · · · · · · RESET Automatic setting of clock by radio signal from the US Atomic Clock Time display with Hour, Minutes, Seconds and Date Day of the week displayed in one of three languages (English, French or Spanish) Dramatic blue HiGloTM electroluminescent backlight Alarm with eight-minute snooze Crescendo Alarm increases in volume and intensity Signal Reception Strength indicator U. S. Map icon shows user selected time zone Automatic adjustment for Daylight Savings time Projection of time image Low Battery indicator No indicator The displayed time has been manually set and is not synchronized by the RF signal. Your radio reception is disabled and no signal reception will be initiated unless it is enabled again. Time Display (Figure A. 9) The top line of the display shows the hours, minutes and seconds (AM /PM) of the clock. Pressing the MODE button once will switch the "Seconds' display to the Day of the Week. Kids Projection Clock will continue to display the selected function (Day or Seconds) until the MODE button is pressed again. · DESCRIPTION OF FUNCTION KEYS (Figure A) Snooze/light (Figure A. 1) A light touch on the top of the snooze button activates the unique electroluminescent backlight for 5 seconds. This lite-touch feature also activates the eightminute snooze function. US MAP (Figure A. 10) This map represents the four optional time-zone setting. The darkened of filled zone block indicates the user selected time zone. NOTE: When The Kids Projection Clock is receiving a signal from the US Atomic Clock; outline of this map will flash. Figure C Note: The display backlight and projection function work simultaneously. When ] is pressed both the backlight and projection func[ tion will activate. Month/ Date (Figure A. 11) The Second line of the display shows the Mouth and the Date. Pressing the (( · )) button once will switch the " month and date " to show the "alarm time " The Alarm time is displayed in hours and minutes (AM / PM). NOTE: The (( · )) Clock will continue to display the selected function (Month /Date or Alarm Time) Until the (( · )) button is pressed again. Setting the Time 1) Press and hold MODE button for at least three seconds. [. . . ] Removal or modification of The Kids Projection Clock antenna cable voids this warranty Defective product returns should be directed to the place of retail Purchase. For customer support call 800-853-8883 or reach us Through the Internet at helpme@oscientific. com. TURNING THE ALARM ON or OFF To turn the alarm on or off simply press the ON/ OFF key in any mode. When ] the ON /OFF button is pressed once the alarm is activated (the bell icon [ will appear on the display). The alarm is deactivated when the ON/OFF button is ] disappears from the display. [. . . ]