User manual OREGON SCIENTIFIC RM328PA

[. . . ] If not disposed of properly batteries can be harmful. Protect the environment by taking exhausted batteries to authorized disposal stations. HOW TO USE THE PROJECTOR The projector projects the current time onto a wall or ceiling. To project the time onto a flat surface: In a darkened room, press [ ], the wall projection will activate for approximately 5-seconds. This unit has several features to enhance the clarity of the projected image. button HOW TO USE THE PROJECTOR POWER ADAPTER Your unit comes with a power adapter so you can use the projector for extended periods of time. [. . . ] The projection will also be on for five seconds. - When the antenna symbol blinks, a reception is going on. 2 to 10 minutes, depending on the quality of the signal received. The hourly scanning may take a few seconds only. ABOUT RADIO RECEPTION The RM328PA is a radio frequency (RF) controlled clock. The clock time will automatically synchronize with WWVB-60 time4 When the reception is complete, the radio-reception signal will stop blinking. Interference Reception can be affected by a number of factors. For best reception, place the device away from metal objects and electrical appliances. Note: Interference from sources such as TV sets can affect the signal. If, after batteries have been inserted for ten minutes, the signal is not received, then set the time manually (see section: How To Set The Calendar Clock Manually). The weekday is displayed as an abbreviation in 3 languages. Day-of-the-week Language English Spanish French Monday Tuesday Wed. Thursday Friday Saturday Sunday To change the "seconds" display to the "weekday" display: · When the "seconds" are displayed, press CLOCK once. "SECONDS" AND "WEEKDAY" DISPLAY The "seconds" and the "weekday" share the same section of the display. To change the "weekday" display to the "seconds" display: · When the weekday is displayed, press CLOCK once. CALENDAR AND ALARM TIME DISPLAY The calendar and the alarm-time share the same section of the display. "weekday" display The calendar is displayed in a month-day format. "second" display 5 GB GB 3. Press CLOCK to confirm and proceed to set the minute, year, month, day and display language. For the display language, you can choose between (E) for English, (F) for French and (S) for Spanish (see language chart above). When finished, press CLOCK to return to normal display. If changes are made during the process, the seconds will reset and start from zero. alarm mode To change the calendar display to the alarm-time display: · When the calendar is displayed, press ALARM once. To change the alarm-time display to the calendar display: · When the alarm time is displayed, press CLOCK once. HOW TO SET AND ACTIVATE THE ALARM To set the alarm time: 1. Press and hold ALARM for two seconds when the alarm time is displayed. Press ALARM to confirm and go to the minute digits. Enter the value and press ALARM to confirm. To deactivate it, press ALARM once. HOW TO SET THE CALENDAR CLOCK MANUALLY If the RM328PA is taken outside of the range of US WWVB radio signal it will need to be manually set. When the calendar is displayed, press CLOCK for two seconds. Enter the month using the [ ] and [ ] buttons. [. . . ] If the temperature goes above or below that, the display will show "HHH" or "LLL". HOW TO RESET THE UNIT The RESET button allows you to return all settings to its factory values. The button is required only when the unit is not operating in a favorable way, such as in the rare case of a malfunction. SPECIFICATIONS Operating Temperature : 41°F to 122°F Clock Functions Radio Control : Auto synchronize current time and date by Radio signal generated from WWVB for US : Weekday in English / French / Spanish Current month / date format : 12-hour format : 1 minute crescendo : 8 minutes : +/-0. 5 second/day (when RF is disabled) MAINTENANCE Calendar When handled properly, this unit is engineered to give you years of satisfactory service. Here are a few product care instructions: 1. If the unit comes in contact with water, dry it immediately with a soft lint-free cloth. [. . . ]