User manual OREGON SCIENTIFIC RM382P TIMESPHERE WIRELESS PROJECTION CLOCK

[. . . ] 3 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Clock Display Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Clock Reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Reception Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] RM382PA: · WWVB-60 generated from the atomic clock in Fort Collins, Colorado The radio signal range is 3219 km (2000 miles). RM382P only ­ slide the EU / UK switch to the appropriate setting based on your location. Press RESET whenever you change the selected setting. RECEPTION SIGNAL STRONG WEAK NO SIGNAL signal, it will temporarily turn the projection charging function off. CLOCK SETTINGS You only need to do this if you have disabled the clock radio reception, or if you are too far from the radio signal. Press and hold / to speed through values. The setting sequence is: Time zone, 12 / 24 hour format, hour, minute, year, day-month format, month, day and display language. NOTE If you enter +1 in the time zone setting, this will give you your local time plus 1 hour. If you are in the US (RM382PA only) set the clock to: 0 for Pacific time +2 for Central time +1 for Mountain time +3 for Eastern time The reception icon will blink when it is searching for a signal. If the radio signal is weak, it can take up to 24 hours to get a valid signal reception. For best reception, place the clock away from metal objects and electrical appliances and place near a window. To enable / disable the clock radio reception: Press and hold / . NOTE When the main unit synchronizes with the radio 5 NOTE The language options are (E) English, (F) French, (D) German, (I) Italian, and (S) Spanish. ALARM The clock has 2 alarms. To set an alarm: RM382P_M_EN_OP_REVISED1. indd 5 4/19/06 6:03:37 PM EN EN 1. Press ALARM to toggle between the alarm displays and select either alarm 1 or 2, for setting. Press and hold ALARM to enter alarm setting mode. Press and hold / to speed through values. The setting sequence is: Hour and minute. NOTE "-:--" appears when the alarm is not activated. The alarm icon will appear on the display to show which alarm has been set: ICON / No icons MEANING Alarm 1 / alarm 2 is set No alarm is set NOTE When the snooze function is activated, the alarm icon will flash. PROJECTOR When the projection unit is placed on the main unit it will automatically recharge its batteries and synchronize its time with the main unit. To turn the projector ON / OFF when it is on the main unit: Press PROJECTION on the main unit. ICON DESCRIPTION The projection unit is out of synch with main unit and is being updated The projection unit has just been placed back on the main unit and it is checking to see if it recognizes the projection unit The main unit recognizes the projection unit and is charging it. icon The main unit does not recognize disappears the projection unit. [. . . ] The website also includes contact information for our Customer Care department in case you need to reach us, as well as frequently asked questions and customer downloads. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio / TV technician for help. DECLARATION OF CONFORMITY The following information is not to be used as contact for support or sales. [. . . ]