User manual OREGON SCIENTIFIC RM622P-EASY THERMO PROJECTION CLOCK

[. . . ] 9 Maximum and Minimum Temperatures . . . . . . . . . . . . 9 Reset System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Safety and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Temperature NOTE Do not use rechargeable batteries. 5 EN EN shows when batteries are low. NOTE It is recommended that you use alkaline batteries with this product for longer performance. CLOCK The clock automatically synchronizes the current time and date when it is brought within range of the radio signal DCF77 generated from Frankfurt, Germany for Central Europe (model RM622P) or MSF60 generated from Rugby, England (model RM622PU). NOTE Initial reception takes 2-10 minutes, and is initiated when you first set up the unit, and whenever you press RESET. Once complete, the reception icon will stop blinking. AC ADAPTOR The main unit has a 3. 0V AC/DC adaptor with jack, which provides continuous clock projection. Inserting the adaptor: TURN CLOCK ON / OFF To activate the RF signal, press both the buttons at the same time for 2 seconds. To deactivate the RF signal, press both the buttons at the same time for 2 seconds. and the and the NOTE The RF signal icon appears when it is activated and disappears when it's deactivated. 6 SETTING THE CLOCK MANUALLY CLOCK MODE The top line of the clock display shows hours, minutes and seconds / day. The second line shows calendar/ alarm time and indoor temperature. To toggle between seconds and day display, press the MODE button. THE ALARM FUNCTION BASIC FUNCTIONS When the alarm goes off, you can turn it off by pressing the button. NOTE The alarm will automatically stop ringing after 1 minute. But after 8 minutes, the alarm will sound once more unless the button is pressed. CLOCK SETTING MODE To adjust the clock settings manually without automatic RF synchronization, remember to disable the Radio Reception first. To change calendar, language, time, day of the week and time settings: 1. Press and hold MODE for 2 seconds to enter setting mode. Press setting you want quickly, press and hold or ). (Press the MODE button again to set day, language, day of the week, hour or minutes). NOTE Using the MODE button, the order of the flashing items is: month, day, language, day of the week, hour, minutes and then exit clock setting mode. 7 DISPLAYING THE ALARM TIME By default, the unit's LCD screen displays the current date and month. To display the alarm time instead, press the button. SETTING THE ALARM TIME To set the alarm time: button for 2 seconds. Press and hold the alarm time "hour" will flash). (The alarm time "minutes" and buttons to set the minutes. button to exit the setting alarm time The alarm time should now be displayed. EN EN ACTIVATING / DEACTIVATING THE ALARM To activate the alarm on, press the button. (The alarm bell icon will appear to the left of the alarm time). To deactivate the alarm, press the bell icon disappears. [. . . ] · Remove the batteries if storing this product for a long period of time. · Do not scratch the LCD display. NOTE The technical specification of this product and contents of this user guide are subject to change without notice. Images not drawn to scale. SPECIFICATIONS DIMENSIONS LxWxH 134 x 52 x 82 mm (5. 27 x 2. 04 x 3. 23 inches) 162 g (5. 71 ounces) without battery Weight TEMPERATURE Unit Indoor Range Resolution CLOCK RF Clock Clock display °C -5°C to 50°C 0. 1°C TROUBLESHOOTING PROBLEM SYMPTOM Calendar Clock clock Strange date / month Cannot adjust REMEDY Change language Disable clock Auto or manual (disabled) HH:MM:SS 12hr AM/PM (Model RM622PU) 24hr (Model RM622P) DD/MM; weekday in 5 languages (E, D, F, I, S) Single alarm with 1-minute crescendo Hour format Calendar Cannot auto1. Adjust batteries. [. . . ]