User manual OREGON SCIENTIFIC RM813PA

[. . . ] Insert adapter into the jack at the bottom of the unit. When the low battery indicator [ replace with fresh batteries. Plug the adapter into an electrical wall outlet. Note: Under normal circumstances, the batteries are good for 1 year. However, the battery life can be reduced vastly by frequent use of the projector or snooze function. [. . . ] Press [ ON/OFF ] to deactivate the Alarm. [ disappear when the alarm is being deactivated. Press [ ON/OFF ] to activate the alarm again. ] will CRESCENDO ALARM AND SNOOZE FUNCTION When the alarm goes off at the preset time, the projection will be turned on for 8 seconds. The [ ] icon will be flashing and the alarm sound will be turned on. The crescendo alarm function allows the alarm sound to start off gently with step-up intensity. Without interruption, the alarm will be on for 2 minutes. To stop the alarm, press [ ], [ ON/OFF ] or [SNOOZE]. If [ ON/OFF ] is pressed, the alarm will be turned off permanently. If [ ] is pressed, the alarm will be turned off and be activated again after 24-hours. If [SNOOZE] button is pressed, the alarm sound will be turned off temporarily and the snooze function will be activated. The alarm will go off again after approx. 8 minutes until other key is pressed to turn off the alarm. To toggle among the 4 U. S. time-zones, press [ZONE] button to display Pacific, Mountain, Central or Eastern. HOW TO SET THE ALARM This unit is equipped with a daily alarm. The minutes digits will flash. RESETTING THE UNIT In case of malfunction or abnormal display, press the [RESET] button at the bottom of the unit wth a blunt stylus. All settings will be cleared and reset to their default values. 6. Repeat (3) and (4) to finish the setting. The alarm will be activated automatically. 5 GB GB HOW TO USE THE NIGHTLIGHT RM813PA is equipped with a nightlight. To turn on the nightlight temporarily for testing its functionality, press the [TEST] button with a blunt stylus at the bottom of the unit. The light will be on as long as the button is pressed and held. For continuous use of the nightlight, AC Power adapter is required to be connected. For instructions on how to install the adapter, please see Section "Continuous Projection feature with Power Adaptor. " Once the power adapter is in place, slide the [LIGHT ON ] switch (located at the side of the unit) to the back i. e. [. . . ] Read this instruction manual thoroughly before operating the unit. Battery Type Unit Dimension Unit Weight Lightbulb Rating Lightbulb Dimension : Two (2) UM-3 or "AA" size 1. 5V batteries : 3. 54 x4. 37 x5. 83inches ( H x W x D ) : 7. 05ounces (without battery) : 3V, 300 mA : T10 x 1. 10inches CAUTION -- The content of this manual is subject to change without further notice. -- Due to printing limitation, the displays shown in this manual may differ from the actual display. -- The contents of this manual may not be reproduced without the permission of the manufacturer. PRODUCT SPECIFICATIONS Operating Temperature : +23°F to +122°F (-5°C to 50°C) Radio Controlled : Auto synchronizes current time and date by Radio signal generated from the U. S. Atomic Clock : Day of week in English / French / Spanish Current month / day format Clock Time Accuracy : 12-hour format : +/- 0. 5 second/day (when RF is disabled) 7 Calendar CUSTOMER ASSISTANCE Should you require assistance regarding this product and its operation, please contact our customer care department at 800-853-8883 or via email at helpme@oscientific. com. GB GB WARRANTY This product is warranted to be free of manufacturing defects for a period of 90 days from date of retail purchase. [. . . ]