User manual OREGON SCIENTIFIC RM832A

[. . . ] Slide the B Lock to the unlocked position. IMPORTANT: To set user-selections and settings the RM832A must be in the unlocked position. Locking is recommended during transit to prevent settings from being accidently changed. NOTE: The RM832A features a low battery warning icon. [. . . ] Briefly press the K [MODE] button five more times to exit the clock time set mode. Important: As soon as any manual change in the clock time is made, there is a loss of the signal strength indicator from the display. Setting the Year Month and Date 1) Press and hold K [MODE] button for at least three seconds. The "Hour"segment of the clock time will begin flashing. 2) Briefly press the MODE button and the "Minutes" segment will begin flashing. 3) Briefly press the K [MODE] button once more. The clock time will disappear and be replaced by a flashing year (Ex. This is the year set mode. 4) While the "Year" segment is flashing press the F [I] button to set the desired year. 5) When the desired year is reached briefly press the K [MODE] button and the "Month" digit will start flashing. 6) Press F [I] button until the desired month appears on the display. 7) Press the K [MODE] button to confirm the "month" and the "date" digits will flash 8) Press F [I] until the desired date appears on the display. 9) Press Mode button to confirm the "Date" and the Language display will flash". 10) Press F [I] button until the desired language indicator appears on the display ("E" for English, "F" for French and "S" for Spanish). 11) Press K [MODE] button one more time to exit the set mode and resume normal time keeping. Reset Button: To clear all user-selected settings and to cause the settings to default to their original values, press M [ RESET ]. The reset button is located under the battery compartment door. WARRANTY This product is warranted to be free of manufacturing defects for a period of 3 months from date of retail purchase. Defective product should be directed to the place of retail purchase for exchange. Should this not be possible, contact our customer care department for assistance and a return material authorization. No returns may be made without a return authorization. Please retain your retail receipt as you may be asked to provide a copy of it for proof of date purchased. This warranty does not cover product subjected to abuse, misuse, accidental damage or tampering. Upon return of the defective product, Oregon Scientific will at its discretion, replace the product with either a new or a tested reconditioned product. [. . . ] The displayed time has been manually set and clock is not synchronized with the US Atomic Clock. No Icon Radio signal is disabled and clock is receive signal until clock is reactivated. CUSTOMER ASSISTANCE Should you require assistance regarding this product and its operation, please contact our customer care department at 541-868-8205 or via email at helpme@oscientific. com. TROUBLESHOOTING GUIDE Problem No Display Remedy · Check battery compartment. · Verify that batteries are inserted properly and are of good quality. · If the clock is new and just out of the box, Did Not Receive A Signal allow up to 72 hours for the clock to receive the initial signal · May be caused from too much interference. · Verify that the low battery icon is not displayed. [. . . ]