User manual OREGON SCIENTIFIC RM868P-E

[. . . ] Press [ SNOOZE ] to turn on the projection for 5 seconds. The ] on or off) will be current time with alarm-on/off status ( [ projected onto the surface the lens is facing. To change to view the preset alarm time with its on/off status, press [ SNOOZE ] when projection is already on. Adjust the projected image as below. Current Time & Alarm-on/off Status Alarm Time & Alarm-on/off Status Note: Make sure the voltage is correct. [. . . ] Note: Interference from sources such as TV sets can affect the signal. If, after batteries have been inserted for ten minutes, the signal is not received, then set the time manually (see section: How To Set The Clock & Calendar Manually). ABOUT RADIO RECEPTION When the unit is within range of its respective radio signals, its radio-control mechanism will override all manual settings unless radio reception is being deactivated. After battery installation, the unit will start to search for radio signal automatically. When it is receiving radio signal, the radioreception icon will start to blink. A complete reception generally takes about 2 to 10 minutes, depending on the strength of the radio 5 GB GB HOW TO ENABLE OR DISABLE AUTO-RECEPTION If you wish to disable the auto-reception of radio signal feature ] button for 2 while the unit is within range, press and hold [ seconds. The radio-reception icon on the will disappear and the unit will NOT respond to radio signals. To enable the feature again, press and hold [ ] for 2 seconds. The radio-reception icon will be shown again and it will start blinking to initiate reception automatically. HOW TO SET THE CLOCK & CALENDAR MANUALLY 1. Press and hold [MODE/SET] for 2 seconds. Enter the 2nd time-zone offset hour using [ ] / [ ] . You can select between + 23 and - 23 hours. Hold down either button to rapidly increase or decrease the value. Enter the clock format using [ or 24-hour display. The hand of hour on the analog display will be adjusted simultaneously. The hand of minutes on the analog display will be adjusted simultaneously. Follow the same pattern to set the year, date format (month-day or day-month), month, day, and display language (English [E], German [D], French [F], Italian [I] or Spanish [S]) for day-of-theweek. You can select 12-hour Day-of-the-week Language English German French Italian Spanish Monday Tuesday Wed. The hand of minutes on the analog display will be adjusted simultaneously. The alarm will be automatically activated. To deactivate the alarm, press [ ] / [ ] when the alarm time is displayed. HOW TO USE THE DAILY ALARM An alarm will go off for 2 minutes in two-step crescendo patterns if undisturbed. [. . . ] Use a blunt stylus to hold down the button. All settings will return to their default values. PRECAUTIONS This unit is engineered to give you years of satisfactory service if handled carefully. Do not clean the unit with abrasive or corrosive materials. Do not subject the unit to snow or excessive force, shock, dust, temperature or humidity. [. . . ]