User manual OREGON SCIENTIFIC RM926-DESKTOP DUAL-BAND RADIO CONTROLLED CLOCK WITH MELODY ALARM AND BACKLIGHT

[. . . ] Desktop Dual-band Radio Controlled Clock with Melody Alarm and Backlight Model: RM926 User Manual CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Back View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Replace the batteries whenever the low battery icon is displayed, when the LCD is dim or does not illuminate when the power is on. Replace both batteries at the same time ­ it is dangerous to mix old and new batteries. NOTE It is recommended that alkaline batteries be used for this product to improve the functionality of this product and extend battery life. NOTE Contact your local waste disposal authority for instructions on how to dispose of used batteries. Used batteries can be harmful to the environment, and should not be thrown out with household trash. Upon battery installation, the RM926 will start scanning for a radio signal. will blink according to the quality of the signal received. Generally, complete reception generally takes about 2 to 10 minutes, depending on the strength of the radio signal. The clock automatically searches for a radio signal at 1:00, 2:00, 3:00, 9:00, 15:00 and 21:00 daily. CHECKING RECEPTION STATUS When reception is complete, will stop blinking. The strength of the reception for the last full hour will be indicated. If the unit has successfully received a radio signal, the time and date will automatically adjust to the current time and date. If reception is not successful, you will need to set the clock manually. Initiating a search can be done at any time. To initiate a search, press and hold for about 3 seconds. When the RM926 is within range, its radiocontrol mechanism will override all manual settings. 4 RM926(EN4) 4 2/3/05, 11:21 AM The unit displays different levels of reception that depends on signal strength. RADIO RECEPTION DESCRIPTION Strong Weak No reception No icon Radio reception is disabled and no reception will be initiated until it is enabled again ENABLING / DISABLING RADIO RECEPTION If you wish to deactivate reception for reasons such as traveling outside the reception area (e. g. Asia, Africa or Americas), you may disable the reception. Subsequently, on return, you can enable it again. To manually disable radio reception, press and hold for more than 3 seconds until disappears. To enable radio reception, press and hold for more than 3 seconds. [. . . ] SNOOZE FUNCTION / DEACTIVATING THE ALARM or will blink), press 1. When the alarm sounds ( SNOOZE/LIGHT to stop the alarm and activate the 8-minute snooze function. The alarm will sound again after 8 minutes. Press and hold SNOOZE/LIGHT for 2 seconds or press ALARM to mute the snooze function. [. . . ]