User manual OREGON SCIENTIFIC RM928-SLIM DUAL BAND RF TRAVEL CLOCK

[. . . ] 4 Unpacking the product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Using the pouch as table stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Basic Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · Cleaning ­ Use a damp cloth. Do not use liquid cleaning agents, benzene, thinner, or aerosols. · Ventilation ­ The vents and other openings are designed for ventilation, and should not be blocked or covered. Blocking the vents can cause the product to overheat, and can damage the unit. · Repair ­ Do not attempt to repair the product or modify the circuitry by yourself. Contact the retailer or a qualified repairman if the product requires servicing. Only use replacement parts that are recommended by the manufacturer. · Do not scratch hard objects against the LCD display as this may cause damage. 4 BATTERIES GETTING STARTED UNPACKING THE PRODUCT When you unpack your clock, make sure to keep all the packing materials in a safe place, in case you need to later transport or return it for servicing. In the box, you will find: Main unit Battery User manual Pouch manual To load the battery: Instructions 1. Warning: Incorrect installation may damage the product. NOTE Replace the battery whenever the weak battery mark ( ) is shown, the display is dim, or the display does not illuminate when the power is on. Contact your local waste disposal authority for instructions on how to dispose of used batteries. Used batteries can be harmful to the environment, and should not be thrown out with household trash. USING THE POUCH AS A TABLE STAND Apart from holding your clock, the included pouch can be fashioned into a table stand as well. BASIC DISPLAYS INDOOR TEMPERATURE DISPLAY Soon after battery installation, the unit immediately reads and displays the surrounding indoor temperature. You can choose between displaying the temperature in Celsius or Fahrenheit by sliding the °C/ °F switch on the back of the unit. 1. 2ND TIME DISPLAY Press Zone/ to display the 2nd Time Display. will appear, along with the time of the 2nd city. Refer to SETTING THE CLOCK MANUALLY section for more information on how to set this time display. Fold the pouch backwards and attach the clasp backwards as shown. Press Mode Switch 3. Insert the travel clock snugly into the lining of the newlymade stand. 5 Press Zone / To return to normal time display, press the Mode Switch. EN EN TOGGLING BETWEEN DISPLAYS RADIO RECEPTION DESCRIPTION RADIO RECEPTION DESCRIPTION Strong reception of radio clock signal. Weak reception of radio clock signal. For normal display, toggle between displaying seconds, dayof-week, or current date and month by pressing the Mode Switch. [. . . ] Press Mode Switch to return to normal clock display. Press the ALARM button during normal operation. 8 #1 #2 2. indicates that the 1st alarm display is now shown. Press + or ­ on the Mode Switch to toggle the 1st alarm on (Figure #1) or off (Figure #2). ADDITIONAL FUNCTIONS RESET HOLE If the clock behaves strangely or stops responding, insert and press a blunt stylus into the clock's Reset Hole. The clock will then be reset to its original factory setting. 3. [. . . ]