User manual OREGON SCIENTIFIC RM932A

[. . . ] 3 RM932A GB 3 4/4/03, 11:10 AM 3) Calendar World City Name Abbreviation & Time To display the dual alarm times, press [ALARM] button. GB GB ABOUT RADIO RECEPTION This clock is designed to automatically synchronize its calendar clock once it is brought within range of the U. S. When the unit is within range, its radio-control mechanism will override all manual settings unless auto-reception of radio signal has been manually deactivated. When the clock is receiving radio signal, the radio reception icon will start to blink. A complete reception generally takes about 2 to 10 minutes, depending on the strength of the radio signal. [. . . ] Thursday Friday Saturday Sunday Note: When changes are made to the minute, the seconds will start from zero. The unit will also save all changes and return to normal display automatically after the unit has been left idle for approximately one minute. ABOUT THE HOURLY-CHIME FUNCTION When the Hourly-Chime is set to the on-mode, the indicator [ ] will light up and a beep sound will be given out at the beginning of each hour. 5 RM932A GB 5 4/4/03, 11:10 AM GB GB SETTING THE ALARM This clock is equipped with 2 alarms: Weekday Alarm and Single Alarm. For the Weekday Alarm, alarm will only sound out at the preset times during weekday (i. e. , from Monday to Friday) and will be automatically disabled during the weekend (i. e. , Saturday and Sunday). For the Single Alarm, alarm will sound out once at the preset time. Press [ALARM] to change to the respective alarm-time display mode. Use [ROTARY KNOB] button to enter the hours. The alarm will be automatically activated after setting. To corresponding Alarm-On indicator [ deactivate the alarm, press the [ALARM ON/OFF] button when the corresponding alarm time is displayed. [ -: -- ] will be displayed to indicate such deactivation. ALARM AND SNOOZE FUNCTION The alarm will sound for 2 minutes in two-step crescendo patterns if undisturbed. The Alarm-On indicator will flash and the backlight will be activated for 5 seconds. Pressing [SNOOZE/LIGHT] button will activate the snooze function. When the snooze function is activated, the alarm will be muted temporarily and set off again after 8 minutes. To disable the snooze function when the alarm goes off, you can press and hold the [SNOOZE/LIGHT] button for 3 seconds. Alternatively press [ALARM] or [ALARM ON/OFF] button. SETTING THE WORLD TIME This clock features a World-time display function so that you can check the corresponding time of different places in the world instantly with DST [Daylight Saving Time] automatically adjusted. The names of the world cities are shown in an abbreviated 3-letter format (e. g. , "WDC" for Washington DC, U. S. ). Use the [ROTARY KNOB] button to select the world city. Press the [WORLD TIME] button to confirm. Use a blunt stylus to hold down the button. All settings will return to their default values. WALL-MOUNT OR TABLE-STANDING This unit is designed specially to facilitate table-standing or wallmounting. Wall-Mount: KEY-LOCK FUNCTION To lock all key-operation when carrying this clock with you, slide the [KEY-LOCK] switch to the right. To un-lock all key-operation, slide the switch to the opposite direction. Table-Stand: 12 RM932A GB 12 4/4/03, 11:10 AM MAINTENANCE When handled properly, this unit is engineered to give you years of satisfactory service. Here are a few product care instructions: 1. [. . . ] -- The contents of this manual may not be reproduced without the permission of the manufacturer. Should you require assistance regarding this product and its operation, please contact our Customer Care Department at 800853-8883 or via email at helpme@oscientific. com. WARRANTY This product is warranted to be free of manufacturing defects for a period of 90 days from date of retail purchase. Defective product should be directed to the place of retail purchase for exchange. Should this not be possible, contact our customer care department for assistance and a return material authorization. [. . . ]