User manual OREGON SCIENTIFIC RMB383A

[. . . ] [RESET] BUTTON F G Press to return all settings to default values G. [RELEASE] PUSH BUTTON Press to release the plugged-in antenna 2 BATTERY INSTALLATION This unit is operated by 2 pieces of UM-4 or AAA-sized 1. 5V batteries. Insert two AAA-sized (UM-4) 1. 5V batteries as shown. Replace the battery compartment door. 2. [. . . ] If, after batteries have been inserted for ten minutes, the signal is not received, then set the time manually (see section: How To Set The Clock & Calendar Manually). To display the alarm clock and details, press [ALARM]. The alarm time will appear in the lower line of the display. Press [TEMP] to display the indoor temperature. HOW TO ENABLE OR DISABLE AUTO-RECEPTION If you wish to disable the auto reception of a radio signal when the unit is within range of a transmitter, simply unplug the antenna or press and hold [ w ] for 3 seconds. The radio-reception icon will disappear and the unit will NOT respond to radio signals. To enable the feature again, plug in the antenna again or press and hold [v] for 3 seconds to force signal reception. The radio-reception icon will be shown again and it will start blinking to initiate reception automatically. ABOUT RADIO RECEPTION When the unit is within range of its respective radio signal, the radio control mechanism will override all manual settings unless radio reception has been deactivated. After battery installation (with the antenna plugged in), the unit will start to search for a radio signal automatically. When it is receiving radio signal, the radio-reception icon will start to blink. A complete reception generally takes about 2 to 10 minutes, depending on the strength of the radio signal. The antenna icon indicates the quality of reception. HOW TO SET THE CLOCK & CALENDAR MANUALLY 1. Enter the 2nd time-zone offset hour using [v] / [w]. You can select between + 23 and - 23 hours. Hold down either button to rapidly increase or decrease the value. 5 Strong Weak No Reception Receiving GB GB Time zone setting allows you to display hours for many other cities , e. g. if the unit is at San Francisco (-8 GMT) and you want to know Hong Kong (+8 GMT) hour you should set 16 as offset. 12. Note: The unit will also save all changes and return to normal display automatically after the unit has been left idle for a minute. ABOUT THE HOURLY-CHIME FUNCTION When the Hourly-Chime is set to the on-mode, the indicator [ ] will light up and a beep sound as a reminder will be given out at the beginning of each hour. To enable/ disable this function, please refer to Section "How to set the clock and calendar manually". ABOUT THE ALARM This unit is equipped with 2 daily alarm functiones. You can select 12-hour or 24-hour display. Follow the same pattern to set the year, date format (month-day or day-month), month and day. Press [MODE] button to save the changes and exit. Press [MODE] button right after (within one minute) to set the hourly chime on/off function. Use [v] / [w] to activate deactivate this function. [. . . ] Always read the user's instructions thoroughly before operating the unit. Indoor Temperature : -5°C to +50°C Measuring Range (23°F to 122°F) Resolution Power Weight : 0. 1°C (0. 2°F) : 2 pcs of UM-4 or AAA-size 1. 5V batteries : 200 g (without battery) Dimensions (mm) : - main unit : 80. 8 x 62. 6 x 21. 1 mm ( H x W x D ) - antenna : 29. 4 x 62. 6 x 20. 2 mm ( H x W x D ) Includes carrying Pouch CUSTOMER ASSISTANCE Should you require assistance regarding this product and its operation, please contact our customer care department at 1-800853-8883 or via email at helpme@oscientific. com. WARRANTY This product is warranted to be free of manufacturing defects for a period of 3 months from date of retail purchase. Defective product should be directed to the place of retail purchase for exchange. Should this not be possible, contact our customer care department for assistance and a return material authorization. [. . . ]