User manual OREGON SCIENTIFIC RRM968PU

[. . . ] [ ] Battery-low indicator - Press to increase/ decrease the values in setting modes - Press and hold for 2 seconds to activate/ deactivate the autoreception of RF clock radio signal (When Radio is Off) - Displays when battery power of clock is low A3. [ ] Battery-low indicator TOP VIEW - Displays when battery power of radio is low A4. [ ] Radio-reception icon - Indicates the strength of the reception of clock radio signal A5. [RADIO] BUTTON - Press to turn on or off the radio function A6. [. . . ] Enter the hour-offset by using [VOL +] or [VOL -]. Follow the same procedures to set the 12/24-format, hour, minutes, year, "mm:dd" or "dd:mm" calendar display format, month, day, display languages and hourly chime on/off mode. Press [MODE] to save the changes and exit the setting mode. If changes are made after the minute adjustment, the value of seconds will be reset and start from zero. For the day-of-week you can select among 5 languages -- English (E), French (F), German (D), Italian (I) and Spanish (S). 6 DISPLAY MODES SELECTION Press [MODE] in the normal display mode to scroll through the calendar clock display modes: 1. Clock with Second --------------------------Calendar/Indoor Temperature 2. Clock with Weekday --------------------------------------------Calendar/Indoor Temperature Language Langues Sprache Lingue Idiomas Lingua English Anglais Englisch Inglese Inglés Inglês French Français Französisch Francese Francés Francês German Allemand Deutsch Tedesco Alemán Alemão Italian Italian Italienisch Italiano Italiano Italíano Spanish Espagnol Spanisch Spagnolo Español Espanhol Day-of-the-week Affichage du jour Giorno della settimana Día de la semana Monday Lundi Montag Lunedí Lunes Segunda Tuesday Mardi Dienstag Martedí Martes Terça Wednesday Mercredi Mittwoch Mercoledí Miércoles Quarta Thursday Jeudi Donnerstag Glovedí Jueves Quinta Wochentaganzeige Dia de Semana Saturday Samedi Samstag Sabato Sábado Sábado Sunday Dimanche Sonntag Domenica Domingo Domingo Friday Vendredi Freitag Venerdí Viernes Sexta DISPLAYING AND SETTING THE ALARM This unit is equipped with a daily alarm. To view the preset alarm time, press [ALARM]. To set the corresponding alarm time, follow the instructions below: 1. Press and hold [ALARM] for 2 seconds in alarm display mode. Enter the hour by using [VOL +] or [VOL -]. Enter the minutes by using [VOL +] or [VOL -]. The beep alarm [ ] or radio alarm icon [ ] will blink. Select the alarm-sounding mode by using [VOL +] or [VOL -]. In Beep alarm mode, a 2-minute crescendo alarm will be turned on when the alarm time is up. In Radio alarm mode, when alarm time is up, the radio will be turned on and remained on for 2 hours until it is manually deactivated. If Radio alarm mode is being chosen, the radio will be automatically turned on and the Radio Station Number will flash. Select the radio station by using [STATION]. Please note that in this Radio Alarm mode, manual tuning cannot be used to set the station. Again, select the radio volume by using [VOL +] or [VOL -]. Press [ALARM] to confirm the entry and exit the setting mode. [. . . ] Do not mix new and old batteries as the old ones may leak. Always read the user's instructions thoroughly before operating the unit. To maintain good performances, do not use the units in places which are extremely hot, cold, dusty or humid. In particular, keep the units away from: High Humidity areas (e. g. , bathroom) Extreme hot areas (e. g. , near a heater) Areas exposed to direct sunlight Digital - tuning Radio AM band Frequency FM band Frequency Station Digital Volume Temperature Measurement Main Unit Indoor Temperature Measuring Range Temperature Resolution Power : -5°C to +50°C (+23°F to +122°F) : 0. 1°C (0. 2°F) : - 4 pcs of AA or "UM-3" 1. 5 V batteries - 4. 5 V AC Adapter (for continuous projection) Weight Dimensions Note on Battery : 379g (without battery) : 153 x 126 x 40mm ( L x W x H ) : Batteries included (if any) are for demonstration purpose only. [. . . ]