User manual OREGON SCIENTIFIC SW202

[. . . ] To completely disconnect from power, the unit should be disconnected from the wall socket. NOTE The main unit should not be exposed to wet conditions. No objects filled with liquid, such as vases, should be placed on the main unit. Press + or - to change the settings or press and hold + / ­ to rapidly change the settings. [. . . ] When wake up light has been activated, will be displayed next to ALARM on the LCD screen. NOTE Light will fade-in (gradually increase in brightness) 30 minutes prior to set alarm time. Light will stay on (even after SNOOZE has been pressed) after set alarm time for 60 minutes. SLEEP TIMER To adjust sleep timer setting: 1. Turn on desired option: OPTION PRESS: Radio RADIO Light LAMP Soothing sound NATURE SOUND 2. Press SLEEP repeatedly to change the sleep timer setting (120, 90, 60, 30, 15, 0 min). After 5 seconds of inaction, the timer will automatically be confirmed and set. To view time remaining: · Press SLEEP. TIP Press SLEEP again to change sleep timer (120, 90, 60, 30, 15, 0 min). NOTE Ensure radio or sound and/or light has been selected to activate sleep timer. NOTE If light option has been chosen for sleep timer, light will fade out. When device has been successfully connected, will be displayed on the LCD screen and sound will emit from speakers. LCD BACKLIGHT To adjust brightness: · Slide DISPLAY BRIGHTNESS switch to LOW / HIGH. Press RESET to return to the default settings. SNOOZE To silence the alarm: · Wave your hand up to 8 cm (3 inches) in front of the SNOOZE IR motion sensor to silence it for 8 mintues ( will blink during this time) OR · Press any key to turn the alarm off and activate it again after 24 hours. SPECIFICATIONS MAIN UNIT TYPE HxWxD Weight FM Power When disposing of this product, ensure it is collected separately for special treatment. Placement of this product on certain types of wood may result in damage to its finish for which Oregon Scientific will not be responsible. Consult the furniture manufacturer's care instructions for information. The contents of this manual may not be reproduced without the permission of the manufacturer. Do not dispose old batteries as unsorted municipal waste. Collection of such waste separately for special treatment is necessary. Please note that some units are equipped with a battery safety strip. [. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: DESCRIPTION 257 x 199 x 140 mm (10. 12 x 7. 84 x 5. 51 in) 386 g (13. 6 oz) without battery 87. 5 to 108 MHz Input: AC 220-240V 50/60Hz (EU version) Input: AC 100-120V 50/60Hz (US/Canada version) 2 x UM-4 (AAA) 1. 5V batteries (for backup) PRECAUTIONS · Do not subject the unit to excessive force, shock, dust, temperature or humidity. [. . . ]