User manual OREGON SCIENTIFIC WMR112A

[. . . ] CABLE FREE WEATHER STATION MODEL: WMR112A USER'S MANUAL THE THERMO-HYGROMETER The thermo-hygrometer measures outdoor temperature and humidity. It uses two (2) UM-3 or "AA" size batteries. Follow these steps to install / replace batteries: 1. Remove the screws on the battery compartment. RESET SECTION 1 INTRODUCTION Congratulations on your purchasing the WMR112A Cable Free Weather Station. [. . . ] Press and hold [MEMORY] till another key tone is heard. Press [MEMORY] to check the memory is clear. OUTDOOR AND CHANNEL TEMPERATURES The temperature readings taken by the outdoor thermo-hygrometer and separate thermo-hygro sensors are displayed on the outdoor and channel temperature window. As this window can display up to four different sets of data, specify the instrument or channel you want to read. Note: The outdoor thermo-hygrometer THGR968 is not included in this package. In this case, "---" will be displayed when [CHANNEL] is pressed and to display readings from the THGR268 or any other remote sensor choose from the apropriate channel 1, 2 or 3 when outdoor temperature is selected. Press the outdoor/channel temperature window. Press [CHANNEL] to go from the outdoor reading taken by the outdoor thermo-hygrometer to those taken by individual sensors i. e. The outdoor thermo-hygrometer is also capable of detecting the dew point temperature as well as the wind chill reading. To display such information, press the outdoor/channel temperature window repeatedly. The temperatures can be displayed in degree Centigrade (°C) or Fahrenheit (°F). Press the outdoor/channel temperature window. Press [UNIT] repeatedly for the desired setting. The selected unit will apply to all temperature displays in this window. Press the weather forecast and barometric reading window repeatedly till the "sea-level" icon is displayed. Press [ ] and [ ] for the current (0 Hr) pressure. 3. Press [ ] and [ ] to change to the desired setting. 5. INDOOR AND DEW POINT TEMPERATURES The current indoor and dew point temperatures, taken by the indoor baro-thermo-hygrometer, are displayed on the indoor temperature window. They can be displayed in degree Centigrade (ºC) or Fahrenheit (ºF). Press [UNIT] repeatedly for the desired setting. The selected unit will apply to all temperature displays in this window. To display the dew point temperature for a channel, press the window again when the channel temperature is located. [. . . ] Do not clean the unit with abrasive or corrosive materials. Abrasive cleaning agents may scratch the plastic parts and corrode the electronic circuit. 6 : 25 to 90% RH : 1% RH : Indoor . . . . . -5°C to 50°C ( 23°F to 122°F ) : Outoor . . . . . [. . . ]