User manual OREGON SCIENTIFIC WS902

[. . . ] · Ensure there is at least 40 cm space above the top of the unit for ventilation purposes. · Ensure distance between unit and wall socket is not longer than the power cord itself. Radio / Rooster crow alarm Batteries serve as a back-up power supply. To fully utilize all features, plug into wall socket. [. . . ] READING LAMP To turn on / off light: Sunrise Wake-up Clock Model: WS902 USER MANUAL EN WAKE UP THE NATURAL WAY Our body clock is often not in sync with the demands and rhythm of modern life. Our biological clock is affected by external cues, such as sunlight. Light at dawn stimulates production of cortisol, which gets the body ready to work and wake up. By simulating dawn, Oregon Scientific's Sunrise Wake-up Clock (WS902) prepares the body to wake up by gradually increasing brightness to the set level in the 20 minutes prior to desired (set) alarm time. Start your day better and feel energised to tackle the day. IMPORTANT This device does not reduce the hours of sleep needed. WAKE UP LIGHT ON·OFF: Enable / disable light for alarm sequence 3. DISPLAY BRIGHTNESS HIGH·LOW: Select LCD display brightness HIGH / LOW 4. AUDIO LINE-IN: Socket for connecting to external music storage device 5. RESET: Reset unit to default settings LCD DISPLAY 1. / : Adjust brightness (only when LAMP function has been activated) NATURE SOUND: Toggle through selection (Forest Birds / Brook / Ocean / Rain) SET CLOCK: Enter clock settings SET ALARM: View alarm status; enter alarm settings LAMP: Turn on/off light + / -: Adjust volume (only when radio / soothing sound is playing); change values of the setting SLEEP: View remaining time; enable radio / soothing sound / light sleep; set sleep timer 10. Beep / selected Alarm with wake up light enabled Batteries low / no battery Alarm time Radio Mode is ON and frequency is displayed Volume is displayed Sleep mode is ON and remaining time is displayed Nature sound selected (1-4) Sound from external source plugged into unit GETTING STARTED REPLACING LAMP For first time use, take out provided light bulb and go directly to step 4. Unplug unit from wall socket and allow unit (bulb) to cool for approx. CAUTION Always allow unit to cool for 15 minutes prior to cleaning, storing, replacing parts as unit can be very hot. Push in OPEN / COVER tab to release lamp cover. Lift cover off. RADIO TUNE : Enable auto-search for radio station; adjust radio frequency marginally (by 0. 05MHz) 10. ALARM: Enable / disable alarm function RADIO TUNE to manually select frequency. SOOTHING NATURE SOUNDS NOTE Deactivate radio first. To activate / deactivate soothing sounds: · Press LAMP located at the bottom left of LCD display. · · · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. To adjust level of brightness: · Press / to increase or decrease brightness. / to rapidly change level of · Consult the dealer or an experienced radio / TV technician for help. DECLARATION OF CONFORMITY The following information is not to be used as contact for support or sales. Please call our customer service number (listed on our website at www. oregonscientific. com), or on the warranty card for this product) for all inquiries instead. TIP Press and hold brightness (1-20). · · · For your convenience, the level of brightness will be stored in memory for the next time light is turned on. PLAY MUSIC Using a cable, plug one end to your music storage device and one end to AUDIO LINE-IN located at the back of unit. [. . . ] · Do not cover the ventilation holes with any items such as newspapers, curtains etc. · Remove dust regularly with a dry cloth. Accumulated dust poses a potential fire hazard. · Do not immerse the unit in water. [. . . ]