User manual OREGON ATC5K

[. . . ] ATC5K_manual-US0710. qxd 8/18/08 5:40 PM Page 1 ATC5K_manual-US0710. qxd 8/18/08 5:40 PM Page 2 I . Quick Start ····················································································································· 1 1 3 3 Dear Customer, II . Camera Precautions ··································································································· III . Technical Specifications ··························································································· IV . [. . . ] You must confirm one of the choices to move onto the next menu mode. Sound Recording Once you have entered this mode the icon will be highlighted and will be shown on screen. means sound is being recorded during filming but at a low volume. Press Menu (one beeping sound) to switch to , which means no sound will be recorded. After , it will loop back to - which means sound is being recorded at high volume - when 'Menu' is pressed again. Press the "Confirm" button (one beeping sound) to confirm the setting and to go to the next function icon. Setting Date/Time (Clock Set) Shift to the Date icon in the Menu mode by pressing the Menu button repeatedly until the icon is reached. When the Date icon is highlighted, press the "Confirm" button to change the date and time. Press the "Menu button" to adjust the last digit of the year (00-09). Press the "Confirm" button to verify the last digit. Press the "Menu button" to adjust the 3rd digit of the year (0X-9X). Pressing "Confirm" will then move the cursor to allow you to adjust the 3rd digit of the year. Press the "Menu" button to select the number and the "Confirm" button to verify, after which you will be able to adjust the month. Setting the Month When adjusting the month, "MM" will be shown. Press the "Menu button" to adjust the month. Press the "Confirm" button to verify, after which you would be able to proceed to setting the date. 12 Picture size 640 X 480 pixel 320 X 240 pixel fps 30 30 11 ATC5K_manual-US0710. qxd 8/18/08 5:40 PM Page 9 Setting the Date When adjusting the date, "DD" will be shown. Press the "Menu button" adjust the date. Press the 'Confirm' button to verify, after which you would be able to proceed to setting the time. to Available Recording Time The available recording time is an approximation (these vary depending on the recording conditions and the type of card). Picture quality setting Internal Memory 32 MB VGA 30 fps 47 s QVGA 30 fps 1 min 36 s Setting the Time Press the "Menu button" to adjust the hour. Press the "Confirm" button to verify the hour, after which you would be able to proceed to setting the minute. Press the "Menu button" to adjust the minute. Press the "Confirm" button to verify the time and exit this mode. [. . . ] Under conditions with high contrast, such as outdoors, the actual time available will be less than under low-contrast conditions. I can't play the video footage on my television -Ensure each end of the AV cable is properly and firmly connected to ATC5K and to your television. -Ensure the ATC5K and television are both turned on. -Ensure you have selected PB to view files. [. . . ]