User manual OREGON BAA898HG

[. . . ] LONG-RANGE WIRELESS WEATHER STATION WITH IN-OUT THERMO-HYGROMETER MODEL : BAA898HG USER'S MANUAL INTRODUCTION Congratulations on your purchase of the BAA898HG Long-Range Wireless Weather Station with In-Out Thermo-Hygrometer. This unit is an all-in-one weather forecasting device which has multiple weather-related functions. Also, with an internal antenna the reception range of this unit can be up to 100 meters. In addition to indoor temperature and humidity, by means of wireless remote thermo-hygro sensor it can simultaneously monitor temperatures and humidities in up to 3 remote locations. [. . . ] Also, this unit is specially designed so that the backlight can be operated differently no matter it is wall-mounted or being put on the table. For the language for day-of-week, you can select E for English, D for German, F for French, I for Italian or S for Spanish. The day-of-week can be expressed as an abbreviation in five different languages. The languages and their selected abbreviations for each day of the week are shown in the language chart below. Day-of-the-week Language English German French Italian Spanish Monday Tuesday Wed. Press [ ] or [ setting. ] buttons to make changes to the alarm hour ] and the minute will flash. Press [ minute by using [ ] or [ ] buttons. The alarm will be automatically activated. The ALARM ON icon [ ] is shown and the alarm will active at the specified time. To deactivate the daily alarm function, press the [ ] button when the alarm time is displayed. The ALARM ON icon will disappear and [ - : -- ] will be displayed. To activate, press the [ ] button to display the alarm time again. ALARM AND SNOOZE FUNCTION When the daily alarm goes off, the backlight will be on for five seconds and the alarm-on icon will flash. Initially the active alarm will have a gentle sound. The intensity will increase in three stages. Without interruption, the unit will alarm for 2 minutes. To stop the alarm sound, press any button (expect [ MEMORY ] & [ CHANNEL ] buttons). If the [ SNOOZE / LIGHT ] button or stand-button is pressed, the snooze function will be triggered. The alarm sound will stop and the alarm-on icon will blink for eight minutes. To deactivate the SNOOZE function, press the [ ] button. Note: When changes are made to the minute, the seconds will start from zero. SETTING THE ALARM To set the Alarm: ] button to display the daily alarm time (the icon 1. Press [ "AL" will be displayed) 2. ] for three seconds and the value for the 7 GB GB PRE-ALARM FUNCTION FOR CHANNEL 1 REMOTE SENSOR The alarm function also has a pre-alarm feature which can alert the user before the preset alarm time when weather condition changes. This pre-alarm function applies to Channel 1 Remote Sensor only. Then enter the Pre-Alarm mode by pressing the [ ] button twice. [. . . ] Each press on the button will go back by an hour. Holding down the button will increase the value rapidly. HOW TO WALL MOUNT OR USE THE TABLE STAND (REMOTE UNIT) As for the remote unit, it comes with a wall-mount holder and a removable stand. Wall-Mount: Table-Stand: HOW TO WALL MOUNT OR USE THE TABLE STAND (MAIN UNIT) The unit can be wall-mounted using its recessed screw holes or placed on a flat surface using the detachable table stand. LOW BATTERY INDICATION When it is time to replace batteries, the respective low battery indicator [ ] will show up when the corresponding channel is selected. The battery level of the main unit is shown on the Weather Forecast Window when it is running low. 11 GB GB Wall-Mount: Table-Stand: Gently plug in the table stand as shown: MAINTENANCE When handled properly, this unit is engineered to give you years of satisfactory service. [. . . ]