User manual OREGON BAR908HGA

[. . . ] Metal Weather Station Model: BAR908HG / BAR908HGU / BAR908HGA User Manual CONTENTS Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Front View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Back View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 LCD Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] ICON DESCRIPTION Main unit is searching for sensors. (The number shows which sensor is selected. ) --- shows in Temperature / Humidity Area The selected sensor cannot be found. Search for the sensor or check batteries. Radio Signal Format 4. For best results: · · · · Insert the batteries and select the unit, channel, and radio signal format before you mount the sensor. Place the sensor out of direct sunlight and moisture. Do not place the sensor more than 70 metres (230 feet) from the main (indoor) unit. Position the sensor so that it faces the main (indoor) unit, minimizing obstructions such as doors, walls, and furniture. Place the sensor in a location with a clear view to the sky, away from metallic or electronic objects. Position the sensor close to the main unit during cold winter months as below-freezing temperatures may affect battery performance and · · SEARCH FOR SENSOR 10 To search for a Thermo / Hygro sensor, press SELECT to will show navigate to the Temperature / Humidity Area. next to the Area. Then, simultaneously press and hold MEM and CHANNEL for 2 seconds. NOTE If the sensor is still not found, check the Once complete, the reception icon will stop blinking. The 2 factors: · · icon shown in the Clock Area indicates batteries. CLOCK AND CALENDAR This product tracks the time and date based on radiocontrolled signals from the RTGN318 / RTGN318D / RTGN318A remote sensor, or manual settings that you enter. Connection between the main unit and the sensor that collects RF signals ( ) RF signal reception ( ) How these signals work together: ICON MEANING The unit has contact with the sensor and has synchronized the time. The unit has contact with the sensor but the time has not been synchronized. The unit has lost contact with the remote sensor but the time is synchronized. The unit has lost contact with the remote sensor and the time is not synchronized. The unit cannot reach the remote sensor. RADIO-CONTROLLED CLOCK The time and date are automatically updated by radiocontrolled clock signals from official time-keeping organizations. The signals are collected by the remote sensor RTGN318 / RTGN318D / RTGN318A. · BAR908HG (RTGN318): DCF-77 signal: within 1500 km (932 miles) of Frankfurt, Germany. · BAR908HGU (RTGN318D): Slide EU / UK to select the signal received. EU: DCF-77 signal: within 1500 km (932 miles) of Frankfurt, Germany. UK: MSF-60 signal: within 1500 km (932 miles) of Anthorn, England. [. . . ] Do not dispose old batteries as unsorted municipal waste. Collection of such waste separately for special treatment is necessary. Please note that some units are equipped with a battery safety strip. Remove the strip from the battery compartment before first use. TROUBLESHOOTING PROBLEM Barometer Calendar SYMPTOM Strange readings Strange date / month Cannot adjust clock Clock Cannot auto-synch REMEDY Set altitude/unit Change language Disable radiocontrolled clock 1. [. . . ]