User manual OREGON EW99 REV 1

[. . . ] Do not place the sensor more than 30 meters (100 feet) from the main (indoor) unit. Position the sensor so that it faces the main (indoor) unit, minimizing obstructions such as doors, walls, and furniture. Place the sensor in a location with a clear view to the sky, away from metallic or electronic objects. Position the sensor close to the main unit during cold winter months as below-freezing temperatures may affect battery performance and signal transmission. [. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. DECLARATION OF CONFORMITY The following information is not to be used as contact for support or sales. Please call our customer service number (listed on our website at www. Com), or on the warranty card for this product) for all inquiries instead. Com) to learn more about Oregon Scientific products such as digital cameras; MP3 players; children's electronic learning products and games; projection clocks; health and fitness gear; weather stations; and digital and conference phones. The website also includes contact information for our Customer Care department in case you need to reach us, as well as frequently asked questions and customer downloads. We hope you will find all the information you need on our website, however if you're in the US and would like to contact the Oregon Scientific Customer Care department directly, please visit: www2. Press RESET to return the unit to the default settings. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Make sure you use a different channel for each sensor. This product is engineered to give you years of satisfactory service if you handle it carefully. Here are a few precautions: · Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth. Do not clean the unit with abrasive or corrosive materials. Do not subject the unit to excessive force, shock, dust, temperature or humidity, which may result in malfunction, shorter electronic life span, damaged battery and distorted parts. Do not tamper with the unit's internal components. Doing so will invalidate the warranty on the unit and may cause unnecessary damage. Only use fresh batteries as specified in the user's instructions. Due to printing limitations, the displays shown in this manual may differ from the actual display. [. . . ] This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful Initiate a sensor search on the main unit to start receiving temperature data from the sensor. Secure the sensor in the desired location using the wall mount or table stand. PROBLEM Remote sensor SYMPTOM Cannot locate remote sensor Cannot change channel Data does not match main unit REMEDY Check batteries Check location Check sensors. Only one sensor is working Initiate a manual sensor search PROBLEME SYMPTOME Capteur à distance REMARQUE Insérez les piles du capteur à distance avant celles de l'appareil principal. [. . . ]