User manual OREGON PE980

[. . . ] To turn the step counter On or Off: In situations where you do not need to record step count, you can turn Off the step counter. Press and hold SET and MEM at the same time for 2 seconds until the following screen is displayed. To turn On the step counter, repeat the same action. Take precautions when handling all battery types. [. . . ] The current step count, calorie burned, distance walked, and exercise timer will be reset automatically to zero at midnight. SETTING MODE In the Setting Mode, you can set the time, alarm On/Off and alarm time, user's weight and stride length, and beep tone On/Off. Wait for the setting option to flash, then press DISP or MEM to set values. You can press and hold these buttons to rapidly set the values. Wait 3 seconds for the pedometer to automatically confirm and move to the next setting option. The setting sequence is: stride length unit, stride length value, weight unit, weight value, 12/24 time format, time (hour and minute), alarm On/Off, alarm time (hour and minute) (if alarm On is selected) and beep tone On/Off. Hereby, Oregon Scientific, declares that this ANYWEAR Slim Pedometer (Model: PE980) is in compliance with EMC directive 89/336/CE. A copy of the signed and dated Declaration of Conformity is available on request via our Oregon Scientific Customer Service. : Indicates calorie burned is displayed : Indicates beep tone is Off : Indicates battery power is low Displays mode banners, number of steps, calorie reading or distance walked : Indicates alarm is On : Indicates exercise timer is displayed : Indicates on which day (1-7) before is the displayed data recorded / : 12 hour clock Displays time or Setting Mode values : Indicates distance walked is displayed : Indicates you are in Memory Mode : Indicates there is a following page : Smart indicators to press the button beside : Indicates step counter is On : Indicates there is a previous page : Calorie unit : Distance unit (Miles / Kilometres) : User's stride length unit (Centimetres / Inches) : Weight unit (Pounds / Kilograms) NOTE You can press SET to skip through settings. rEMARK Press any button to silence an activated alarm. If not deactivated, the alarm will be activated at the same time the following day. MEMORY MODE In the Memory Mode, you can view the records of your steps and calories burned for the past 7 days. : Indique l'affichage des calories consommées : Indique que le bip est désactivé : Indique que la pile est faible Affiche les bannières des modes, le nombre de pas, les relevés de calories et la distance parcourue : Indique que l'alarme est activée : Indique que le compteur d'entraînement est affiché : Indique le jour (1-7) d'enregistrement des données affichées / : Horloge format 12 H Affiche l'heure ou les valeurs du Mode Réglage : Indique que la distance parcourue est affichée : Indique que vous êtes dans le Mode Mémoire : Indique la présence d'une page suivante : Icône vous indiquant d'appuyer sur le bouton situé à côté : Indique que le compteur de pas est activé : Indique la présence d'une page précédente : Unité de mesure de calories : Unité de distance (Miles / kilomètres) : Unité de longueur d'enjambée de l'utilisateur (centimètres / pouces) : Unité de poids (livres/kilogrammes) ACTIVATE PEDOMETER (FIRST-TIME USE ONLY) Press and hold any key until the screen is activated. CARRYING THE PEDOMETER The PE980 can be carried on the waist, around the neck or in pockets and handbags by using the adjustable strap or detachable clip provided. SET TIME AND USER DATA To effectively use the pedometer for calculating calorie burned (based on step count and user body weight) and distance walked (based on step count and length of user's stride), you are advised to set the time and your user data in the Setting Mode. IMPORTANT Remember to set the time and your user data after every battery replacement. When toggling between days, the record displayed will be of the same category (either step count or calorie burned). When viewing a day's record, the pedometer will automatically toggle for 3 seconds between step count and calorie burned display. REMARK Toggle through all 7-day records to return to the Main Mode. To reset records: You cannot reset the records manually. [. . . ] Do not subject the product to excessive force, shock, dust, temperature changes, or humidity. Do not tamper with the internal components. Doing so will terminate the product warranty and may cause damage. Do not scratch hard objects against the LCD display as this may cause damage. [. . . ]