User manual OREGON RM832

[. . . ] Other features of the RM832 include: Back light for easy reading in the dark Displays time, date and day of the week in 4 languages (E/D/F/I) Alarm time with 8-minute snooze function 2-minute crescendo alarm that increase in volume & low battery indication. Interference Reception can be affected by a number of factors. for best reception , place the device away from metal objects and electrical appliances. [. . . ] to stop an alarm sound: ] , the alarm will stop and will activate To stop the alarm , press [ at the same time the following day. To disable the alarm, press [ ON/OFF ], the alarm will stop and it is not active, it will not activate the following day. MODE 2 Local Time The Lite Touch feature enables you to activate the 8 minute snooze by gently rocking the RF clock backwards on its stand with the touch of your fingers or simply pass the SNOOZE button. MODE 3 Local Time / Second Time-Zone Time Using the Lite Touch feature, the display will activate for five seconds so you can see the display in the dark. You may also turn the backlight on by simply pass the LIGHT button. MODE 4 Second Time-Zone The RM832 has a special locking feature that locks all the keys to prevent accidental operation of the unit. Battery compartment Accommodates two UM-4 or "AAA" size batteries N. [RESET] button Resets the unit to its original factory settings Display description for each time / date To select a different time-display mode: The RESET button allows you to return all settings to its factory values, which are, 1-1 (1st of January) for date, 00:00 for time and 0:00 for alarm, which will be deactivated. The button is required only when the unit is not operating in a favorable way, such as in the rare case of a malfunction. The unit uses two (2) UM-4 or "AAA" size 1. To use the cover as a stand, rotate the hinges cover over the back of the clock. When the unit is outside of the 1500km radius of the radio signal generated from DCF77 Frankfurt, Germany, the unit may require manual setting. If not disposed of properly batteries can be harmful. Protect the environment by taking exhausted batteries to authorized disposal stations. Note: Battery-low indicator " " Replace the batteries when the battery-low indicator lights up. Note: After replacing the batteries, the entire display will activate for about 1 second, then LCD will show as in. [. . . ] -- Due to printing limitation, the displays shown in this manual may differ from the actual display. -- The manufacturer and its suppliers held no responsibility to you or any other person for any damage expenses, lost profits, or any other claim arise by using this product. -- The contents of this manual may not be reproduced without the permission of the manufacturer. [. . . ]