User manual OREGON RMB899P

[. . . ] ⷠDo not clean the unit with abrasive or corrosive materials. This may scratch the plastic parts and corrode the electronic circuit. ⷠDo not subject the unit to excessive force, shock, dust, temperature or humidity, which may result in malfunction, shorter electronic life span, damaged battery and distorted parts. ⷠDo not tamper with the unit's internal components. [. . . ] Com) to learn more about Oregon Scientific products such as digital cameras; MP3 players; children's electronic learning products and games; projection clocks; health and fitness gear; weather stations; and digital and conference phones. The website also includes contact information for our Customer Care department in case you need to reach us, as well as frequently asked questions and customer downloads. We hope you will find all the information you need on our website, however if you're in the US and would like to contact the Oregon Scientific Customer Care department directly, please visit: www2. If the radio signal is weak, it can take up to 24 hours to get a valid radio signal reception. For best reception, place the clock away from metal objects and electrical appliances and place near a window. NOTE This product may malfunction when radio interference appears on the AC power line. The unit will revert to normal operation when interference stops. NOTE When you are in the Signal Reception Mode, "OFF" will display when the clock radio signal reception is disabled. UP / DOWN: Increases / decreases the value of a setting; press and hold to speed through values Projector: Projects time on the wall or ceiling : Enables the snooze function or activates the backlight and projector for 5 seconds MODE: Press to toggle between clock displays; press and hold to change clock / calendar settings ALARM: Press to toggle between alarm 1 and 2; press and hold to change alarm settings This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. If you cannot receive clock signals, or wish to manually set the clock, you must disable the clock radio reception, as shown above. Press and hold MODE for 2 seconds to enter setting mode. The setting sequence in the Clock or Zone Mode is: Time zone offset hour, 12 / 24 hr format, hour, minute, year, date / month format, month, date and day of the week language. NOTE The language options are (E) English, (F) French, (D) German, (I) Italian, and (S) Spanish. [. . . ] To continuously project the time you must use the AC adapter. Once the batteries have been inserted the unit will immediately ask you to set the clock reception signal (see Clock Reception section for signal options). Hereby, Oregon Scientific, declares that the World Travel Projection Clock (Model RMB899P) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the signed and dated Declaration of Conformity is available on request via our Oregon Scientific Customer Service. [. . . ]