User manual OREGON RRM320P

[. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Position the sensor close to the main unit during cold winter months as below-freezing temperatures may affect battery performance and signal transmission. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. TIP The transmission range may vary depending on many factors. You may need to experiment with various locations to get the best results. Use alkaline batteries for longer usage and consumer grade lithium batteries in temperatures below freezing. Make sure the adapter is not obstructed and is easily accessible to the unit. PM: Indicates PM (12 hour mode) Time zone offset Clock signal reception indicator Indicates radio volume Clock / Volume Radio station (logged) Sleep mode is ON Indicates Radio mode is ON and frequency is displayed Calendar / Radio frequency Sensor batteries low Sensor reception indicator User selectable temperature units Temperature Beep / Radio Alarm 1/ 2 Main unit batteries low / no battery To completely disconnect from power, the adapter should be disconnected from the main unit. NOTE The main unit and adapter should not be exposed to wet conditions. No objects filled with liquid, such as vases, should be placed on the main unit and adapter. NOTE Batteries should not be exposed to excessive heat such as sunshine or fire. cLOCK CLOCK RECEPTION This product is designed to synchronize its clock automatically with a clock signal received from provided remote sensor. Do not subject the unit to excessive force, shock, dust, temperature or humidity Do not cover the ventilation holes with any items such as newspapers, curtains etc. If you spill liquid over it, dry it immediately with a soft, lint-free cloth. Do not clean the unit with abrasive or corrosive materials. Do not tamper with the unit's internal components. Images shown in this manual may differ from the actual display. When disposing of this product, ensure it is collected separately for special treatment. Placement of this product on certain types of wood may result in damage to its finish for which Oregon Scientific will not be responsible. consult the furniture manufacturer's care instructions for information. [. . . ] Press SET or SET to confirm and move to the next setting. The setting options are as follows: hour, minute, beep alarm / radio alarm . Hereby, Oregon Scientific, declares that this Radio Controlled Projection Clock with FM Radio and Outdoor Temperature (model: RRM320P / RRM320PA / RRM320PU) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the signed and dated Declaration of Conformity is available on request via our Oregon Scientific Customer Service. [. . . ]