User manual OREGON SKT338N

[. . . ] Timer alarm starts to sound for 1 minute and Timer will automatically count up at 1 second resolution. When you think the count-up period is good enough for you, press [START/STOP] button once to stop the count-up Timer. Elapsed period after Timer counts down to zero can be known from the countup time on display. [. . . ] remove exhausted battery , insert a new 1. 5V C-13 or SR44 size button cell battery (make sure '+' is facing outward) and close battery cover. The Timer can clip on thin board or shirt pocket by using the plastic clip at back side of Timer. A beeping sound can be heard for each press of button. Press and hold [HR] button for 2 seconds will set the hour digits more quickly. press [MIN] button to advance minute digits. A beeping sound can be heard for each press of button. Press and hold [MIN] button for 2 seconds will set the minute digits more quickly. press [SEC] button to advance second digits. A beeping sound can be heard for each press of a button. If setting is not the desired one, press [RESET] button once to reset Timer to zero and set time again. The Timer can attach to iron or steel surfaces by using the magnet at back side of Timer. The Timer can stand on table surface by filipping out the metal stand bar at back side of Timer. After time is set, press [START/STOP] button once and Timer will start to count down at 1 second intervals. [. . . ] Com) to learn more about Oregon Scientific products such as digital cameras; MP3 players; children's electronic learning products and games; projection clocks; health and fitness gear; weather stations; and digital and conference phones. The website also includes contact information for our customer care department in case you need to reach us, as well as frequently asked questions and customer downloads. We hope you will find all the information you need on our website, however if you'd like to contact the Oregon Scientific Customer Care department directly, please visit: www2. [. . . ]