User manual OREGON THGR228N

[. . . ] We hope you will find all the information you need on our website, however if you'd like to contact the Oregon Scientific Customer Care department directly, please visit: www2. Congratulations on your purchase of the Remote Thermo-Hygro Sensor (THGR228N). This product is engineered to give you years of satisfactory service if you handle it carefully. Do not clean the unit with abrasive or corrosive materials. [. . . ] - Due to printing limitation, the displays shown in this manual may differ from the actual display. - The contents of this manual may not be reproduced without the permission of the manufacturer. Note: To ensure proper reception between the main unit and the remote sensor, follow the instructions carefully. Place both units as close as possible to each other. remove the screws on the battery door of the remote unit. Assign a different channel to each remote sensor by changing the channel switch in the battery compartment of the remote sensor. Follow the instructions as set out in the User's manual. replace the battery compartment door and secure its screws. Position the remote sensor and main unit within effective transmission range, which in usual circumstances, is 30 meters. Note: The effective range may be limited by building materials and the position of either the main unit or remote sensors. try various set-up arrangements for best result. Though the sensor is weatherproof, and is meant for use outside, it should be placed away from direct sunlight, rain, or snow. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] La lecture du senseur à distance indiquée sur l'Ecran à cristaux liauides dépend de la chaîne du senseur à distance qui aura été choisie. The reset function is required only when the unit is operating in an unfavorable way or malfunctioning. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. [. . . ]