User manual ORIENT CDB05001B0

[. . . ] * It is recommended that you use the watch correctly following the above-mentioned scope of usage after ascertaining water resistance precautions marked on the dial face of the watch or on the back of the watchcase. 1 A watch with water resistance for daily life 30M (3 bar) can be used during face-washing, etc. But cannot be used in an environment in which it will be submerged in water. 2 A watch with reinforced water resistance for daily life I 50M (5 bar) can be used while swimming, etc. [. . . ] Search the caliber number corresponding to the movement number referring to the correspondence table. Example A : When the case code is "DB05-C0", the caliber number is "DB". Example B : When the case code is "469396-81", the movement number is "469". The caliber number corresponding the number will be found "EM" on the table. * The place of case code may vary and its letter size may be small and difficult to see depending on the characteristics of watches. * The pictures and illustrations on this manual may differ from the actual appearance of your watch but the function and operation procedures are the same. (1) Vibrations: 21, 600 vibrations/1 hour (2) Number of jewels: 21 jewels (3) Running time: More than 40 hours (4) Shock-proof bearings to protect the balance with hairspring from shocks. the stated daily accuracy is in the following coditions: · After 24 hours at room temperature with the mainspring wound fully and the dial facing up. ⷠDue to the characteristics of the automatic winding watch, the time may deviate from the stated "daily accuracy" depending on the following conditions: amount of time the watch is worn each day, position of the watch, movement of your arm, winding condition of the mainspring. Product specifications may change without notice, for improvement. * Avoid setting the date during the time periods listed in "Remark1" above since the calendar changes during this time. If the date is set during this time period, the date may not change or the watch may malfunction. Be sure to move the hour and minute hands away from this time period when setting the date. * The position of the crown, date indicator, or day of the week window may be different, depending on the model. (1) The mainspring is wound by natural movements of your arm when wearing the watch on your wrist. (2) If your watch stops, swing the watch back and forth ten or more times to re-start the second hand. After it starts moving, set the date and time. (3) This watch will run approximately 40 hours after it is fully wound. If it is not wound enough, the watch may lose accuracy. In order to maintain the watch's accuracy, we recommend wearing the watch at least 8 hours a day. When you turn the crown counterclockwise, the spring will not be wound. (3) Once the spring is fully wound , the crown will no longer turn. [. . . ] ) are aligned with the section that does not have the days of the week printed on the dial (3 - 4 o'clock side), days of the week will not be indicated at the end of the month. You can easily use the calendar for the year Example 1: printed on the rotating ring by operating the crown. Depending on the model, the month on the Month six o'clock side may be printed in roman numerals or alphabet. Example 1: To set October 2007 (1) Turn the crown and set "07" on the rotating Rotating ring: ring to "OCT" on the six o'clock side. [. . . ]