User manual ORION TELESCOPES & BINOCULARS 04760
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ORION TELESCOPES & BINOCULARS 04760. We hope that this ORION TELESCOPES & BINOCULARS 04760 user guide will be useful to you.
Lastmanuals help download the user guide ORION TELESCOPES & BINOCULARS 04760.
Manual abstract: user guide ORION TELESCOPES & BINOCULARS 04760
Detailed instructions for use are in the User's Guide.
[. . . ] Mirror Cells for Newtonian Primaries #4760-63
The Orion Mirror Cell provides a convenient way to mount your primary mirror in your Newtonian reflector telescope. It has three-bolt tilt adjustment for quick and easy collimation. [. . . ] Wrap duct tape around the edge of the mirror and cell. This provides a safety net if the mirror ever happens to become unglued. Make sure the duct tape goes no higher than 1/8" below the surface of the mirror. Attaching the Mirror Cell to the Telescope Tube Now that the mirror is securely housed in the mirror cell, it's time to mount it in the actual telescope tube. Four holes, 1/4" in diameter, need to be created on the bottom of the tube. These holes should be about 1/2" up from the bottom and 90° apart. Make sure that the hole placement is such that the holes will line up with the bolt inserts on the side of the mirror cell before drilling. Lower the tube over the mirror cell, matching the holes in the tube with the bolt inserts on the mirror cell. Insert the allen head bolts supplied with the mirror cell through the tube and into the cell. All collimation adjustments can be done by loosening (which pushes the mirror forward) or tightening (pulls the mirror back) the three allen head bolts located on the bottom of the unit.
Sand 3 circles here
Gluing the Mirror to the Mirror Cell Please read all directions before starting 1. [. . . ] silicone rubber adhesive, apply three dabs (1" diameter for 6 and 8" mirrors; 2" diameter for larger
Customer Support (800) 676-1343 E-mail: support@telescope. com
Corporate Offices (831) 763-7000
Providing Exceptional Consumer Optical Products Since 1975
P. O. Box 1815, Santa Cruz, CA 95061
IN 064 0697 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ORION TELESCOPES & BINOCULARS 04760
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ORION TELESCOPES & BINOCULARS 04760 will begin.
