User manual ORION TELESCOPES & BINOCULARS SKYQUEST AD B
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ORION TELESCOPES & BINOCULARS SKYQUEST AD B. We hope that this ORION TELESCOPES & BINOCULARS SKYQUEST AD B user guide will be useful to you.
Lastmanuals help download the user guide ORION TELESCOPES & BINOCULARS SKYQUEST AD B.
Manual abstract: user guide ORION TELESCOPES & BINOCULARS SKYQUEST AD B
Detailed instructions for use are in the User's Guide.
[. . . ] NOTE: This addendum is for #9980 SkyQuest XT8 Dobsonian Telescopes shipped after 3/15/00
Addendum to the Instructions: Primary Mirror Adjustment
#9980 SkyQuest XT8 Dobsonian Reflector Telescope
There has been an improvement to your SkyQuest XT8 that is not mentioned in the provided instruction manual. The primary mirror collimation thumb screws have been changed to facilitate easier alignment of the optics. [. . . ] The other three smaller thumb screws lock the primary mirror's position in place; these thumb screws must be loosened before any collimation adjustments can be made to the primary mirror. To start, unthread the thumb screws that lock the primary mirror in place a few turns each (Figure 19). The thumb screws are slotted, so if they are too difficult to loosen with your fingers, use a flat-head screwdriver. Now, try tightening or loosening one of the spring-loaded collimation thumb screws one turn (Figure 20). Look into the focuser and see if the secondary mirror reflection has moved closer to the center of the primary mirror reflection. Repeat this process on the other two collimation thumb screws, if necessary. It will take a little trial and error to get a feel for how to tilt the mirror in this way to center the reflection. (It helps to have two people for primary mirror collimation, one to look in the focuser while the other adjusts the collimation thumb screws. ) Do not loosen (i. e. , rotate counter-clockwise) each collimation thumb screw too much, or the thumb screw will completely unthread from the mirror cell casting. Rather, try tightening the other two collimation thumb screws. Once the secondary mirror reflection is centered in the primary mirror reflection, retighten the thumb screws that lock the primary mirror's position in place. [. . . ] The tilt of the primary mirror is adjusted by turning one or more of the three spring-loaded collimation thumb screws.
Customer Support (800) 676-1343 E-mail: support@telescope. com
Corporate Offices (831) 763-7000
Providing Exceptional Consumer Optical Products Since 1975
P. O. Box 1815, Santa Cruz, CA 95061
IN 139 Rev. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ORION TELESCOPES & BINOCULARS SKYQUEST AD B
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ORION TELESCOPES & BINOCULARS SKYQUEST AD B will begin.
