User manual PACKARD BELL DVD DIVX 450 PRO

[. . . ] No part of this manual may be reproduced or transmitted, in any form or by any means, whether electronic, chemical, manual or otherwise, including but not limited to photocopying, recording, or information storage and retrieval systems, for any purpose without prior written permission of Packard Bell B. Specifically disclaims all warranties, either express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose with respect to this product and documentation. updates to hardware components are made regularly. Therefore some of the instructions, specifications and pictures in this documentation may differ slightly from your particular situation. [. . . ] pause button: Prev button: Next button: If there is a DVD disc, the unit will show the menu or the titles. If there is an audio CD, the unit will play the first tune. When the unit plays a disc, press the OSD button to browse through several options. Note that display may vary according to disc type. Press the OSD button once to display single elapsed time. Press again to display single remaining time. If the disc you are playing supports this function, use this button to select your preferred viewing angle. Press the Subtitle button several times to browse through subtitle options. Use the Program button to program the playing sequence using the numeric buttons. Press the L/R button to toggle between different audio modes: AUDIO1, AUDIO2, AUDIO1 VOCAL, AUDIO2 VOCAL (for DVDs), within LEFT VOCAL, RIGHT VOCAL, MONO_LEFT, MONO_RIGHT, STEREO (for SVCD). If the disc supports several audio languages, you can use this button to select one. PSCAN (Progressive Scan) output mode is available only if the unit supports this. With PBC on (see below), press the Sub-menu button to display the available options (only valid for discs with multi-menu). When the unit is in PBC OFF or stop state, press this button to activate the nine pictures browse function. These buttons are used to browse through several menus. To play a track directly, press the corresponding number. Use these buttons for fast forward or rewind. Pressing the buttons several times increases the speed up to its maximum level, then resumes at normal speed. Press once to stop display and keep the position in memory. If you press play the display will resume (certain types of discs only). If you press Stop again, this will completely stop display. With PBC on you must return to the main menu if you wish to select a title, chapter or song. [. . . ] Note: during Music Slide Show, image transformation, zoom and thumbnails are not allowed. If you have any of the following problems, you could try following methods first. If this doesn't fix the issue then please refer to your Warranty guide: Please confirm to firm connection between the unit & other systems such as TV set etc. A disc can not be played A single sided disc should be placed with the label side up; · please check if the disc is clean. [. . . ]