User manual PACKARD BELL ONETWO XX.U85 [U86]

[. . . ] For example, you can use passwords and share files as Read Only. For more information on viruses, please refer to the Tutorials section of Packard Bell InfoCentre. EPILEPSY WARNING DISCLAIMER NEC Computers International B. V. specifically disclaims all warranties, either express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose with respect to this product and documentation. Updates to software and hardware components are made regularly. [. . . ] In this case, playback is only possible on conventional CD or DVD players. Select an action I NTERNET 16. I Select the appropriate device CANNOT CONNECT TO THE INTERNET To help ensure a good connection to the Internet, always use a grounded power socket and make sure your modem is connected to a telephone socket without an extension cord. In thunderstorm conditions, make sure that you disconnect your modem from the telephone line and pull out the power cord from the power outlet. See page 2 Your sound hardware does not work properly. - Run the Packard Bell SmartRestore utility to easily uninstall and reinstall the faulty components drivers. See page 38 - Check that your sound card is correctly configured. Click on Start > Control Panel > Sounds, Speech, and Audio Devices > Sounds and Audio Devices. In the Sound and Audio Devices Properties, select the Hardware tab. - Make sure that your computer sound is set up properly. See previous steps - Make sure that the disc's printed side is facing upward in the drive and that the disc is lying flat in the drive tray. See page 11 - Wait for the disc drive's indicator light (busy signal) to stop flashing before you try to start the CD player program. - Check the login and setup information given to you by your ISP The server you are trying to Check with your ISP whether the connect to is out of order. service is available. If you cannot see this icon: Click on Start > Control Panel > Network and Internet Connections > A Network Connections. B Double-click on the icon and click on Properties. 17. MY INTERNET CONNECTION NO LONGER WORKS Your computer's Internet configuration has been altered or deleted. Possible cause Possible solutions The settings in your Internet When you subscribe, your ISP usually browser or your e-mail program provides connection details (user have been modified. name, password, server phone number, The connection settings have been e-mail address, etc. ). Check these details and restore your Internet settings, follomodified. Your account with your Internet Contact your ISP and check the access Service Provider has been termina- conditions to their Internet server. You have moved and your dialling Change your settings by clicking on location has changed. Start > Control Panel > Network and Internet Connections > Network Connections. You have performed a full system If you subscribed to one of the ISPs recovery using the Packard Bell offered by Packard Bell, try to reinstall Recovery Program. the Internet service: Click on Start > All Programs > Online Services and click on your provider's name. C A connection to the remote site Try again later or check with your ISP cannot be established. [. . . ] Class 1 laser products are not considered hazardous. The optical devices are designed such that there is never human access to laser radiation above a Class 1 level during normal operation or prescribed maintenance conditions. The optical devices installed in your computer are designed for use solely as components of such electronic product and therefore do not comply with the appropriate requirements of Code of Federal Regulation Sec. Because exposure to laser radiation is extremely hazardous, under no circumstances should the user attempt to disassemble the laser device. · Cables The use of non-shielded interface cable is prohibited. · Heat build-up and portable computers The AC adapter and the underside of the computer may become hot after prolonged use. [. . . ]