User manual PACKARD BELL PB EASY LITE 300 NOTE TO CUSTOMER FOR NORTON ANTIVIRUS 2000

[. . . ] The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Specifically disclaims all warranties, either express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose with respect to this product and documentation. updates to hardware components are made regularly. Therefore some of the instructions, specifications and pictures in this documentation may differ slightly from your particular situation. [. . . ] Channel select: Browse through television channels when using Windows Media Center. Pressing this button will place the Smart TV32 into a power saving mode (Standby). If you use the main power button (on the left side) to power-off the Smart TV32, it will not make programmed recordings while it is off and may take several minutes to display a television image after being turned on. If the Smart TV32 does not start normally after being placed into a power saving mode, use the main power button (on the left-hand side) to start the Smart TV32. SCART In - this connector links directly to the screen, allowing you to add a games console or other device that may not function correctly when used with Windows Media Center. Use the Source button on the remote control to access this connector. AV In - this SCART connector links to Windows Media Center, allowing you to use a set-top box or similar device with the tools provided by the operating system. An IR signal received by the Smart TV32 may be transmitted to a set-top box or similar device using an IR blaster cable. Use the adhesive pad on the IR blaster cable to attach the end of the cable to the IR window on the device, which may then be hidden or installed in another location. Do not unplug the Smart TV32 without first using the Master Power Button (1) to completely power-down the Smart TV32. You risk losing important data or damaging the Smart TV if you unplug it while it is on or in Standby mode. "Consumable" shall mean any supplementary item delivered with the product, to be used with the Product (a Lithium-ion battery, earphones, cables, remote control, etc. "Software" shall mean a Software program that is pre-installed on the Product or delivered with the Product in the factory packaging. "Warranty" shall mean the warranty applicable by law in the country of purchase of the Product or the contractual warranty You are entitled to as a result of the purchase of the Product. "Warranty Period" shall mean the period during which you are entitled to the application of the Warranty on the Product. "Service & Support" or "Customer Contact Center" or "CCC" shall mean the Packard Bell technical assistance and service provided by its technician or technical representative and the Packard Bell call centre that is accessible to You. "Country" shall mean the country of purchase of the Product by You. "Warranty & Service Sheet" shall mean the document supplied in the factory packaging on which You will find the Warranty Period and the type of service You are entitled to on the Product purchased as well as the contact information to contact Service & Support in the Country. Please note that peripherals/accessories and consumable items may have a different Warranty Period as set out in these Warranty conditions or Your Warranty & Service Sheet. This warranty is limited to the replacement of the Product or part recognised as defective with an identical or comparable Product or part, new or equivalent to new. This warranty covers the repair, parts and labour included or exchange, as set out below, during the Warranty Period. Any items missing from the original packaging of the Product must be reported to Service & Support within 90 days from the date of purchase. [. . . ] Because exposure to laser radiation is extremely hazardous, under no circumstances should the user attempt to disassemble the laser device. The manufacturer is not responsible for any radio or TV interference caused by unauthorised modifications to this equipment. To ensure the extra-low voltage integrity of the equipment, only connect equipment with mains-protected electrically-compatible circuits to the external ports. Every input and output of this product is classified as Safety Extra Low Voltage. [. . . ]